bgm BigBox Touring DER - Touring exhaust for Vespa now available

, ,
Vesspa Bigbox Touring this is it

The BGM BigBox Touring - power for the big tour

Torque from idle with the optics and acoustics like a standard exhaust

Vesspa Bigbox Touring this is it

Available now! Only 158,99 euros *

Exhaust Vespa PX 200, Rally
Exhaust -BGM PRO BigBox TOURING- Vespa PX200, Rally200

Exhaust Vespa PX 80-150, Sprint, VNB, etc. also 8 ″ & 10 ″
Exhaust -BGM PRO BigBox TOURING- Vespa PX80, PX125, PX150, Sprint, GT, GTR

*Incl. 19% VAT, if applicable plus Oporto

BUY VESPA TOURING HERE

Vespa touring exhaust

The steam hammer

The BGM Big Box Touring is the touring steamer in our program.
Developed for full thrust from the lowest engine speed range.

An early entry into performance As well as the significantly increased torque make the touring version of our BigBox the ideal companion for everyone who likes to travel as a couple or with a lot of luggage. Trailer drivers can also look forward to it. The high available torque makes the otherwise mandatory reduction of the reduction unnecessary!

Vespa touring exhaust

 

On a standard PX200, the touring box gets on 300 rpm earlier than the previous king of all touring riders, the standard exhaust. This exhaust is also in good hands on powerhouses like the Polini or Malossi sport cylinders.
Just like the original Vespa exhaust, the BigBox is natural also double-walled and provided with insulating wool.

Vespa touring exhaust

The BigBox Touring

  • Original optics
  • Quiet thanks to the double wall and insulation wool like the original exhaust
  • High torque
  • No performance hole
  • Speed ​​range like original
  • Very unobtrusive
  • Also fits rally / sprint without modifications
  • Solid construction with clamp on the cylinder
  • Handcrafted in Europe

EASY INSTALLATION

The exhaust is mounted like the original exhaust. The elbow is attached to the cylinder using a clamp. Compared to loose fastening with an O-ring seal, this results in the best stability and prevents damage to the outlet flange. The elbow has spring tabs. To ensure optimum ground clearance, a spacer that is too short should not be used on the rear shock absorber.

Vespa touring exhaust

OUR TIP

With a longer gear ratio, the available speed range can be stretched enormously in each gear. This means that the high torque can also be converted into high speed.
Ideal: just that BGM Superstrong clutch with 24 tooth pinion install (original 23 teeth). Works without otherwise having to change anything on the engine and results a plus of ~ 5km / h.

Motors with an abundance of torque can do the longer BGM primary gear with 64 teeth Use in combination with the 24 tooth clutch (+ 8km / h).

CONCLUSION
A lot of steam at a low speed - yeah!

BUY VESPA TOURING HERE
0 replies

Leave a Reply

Want to join the discussion?
Feel free to Contribute!

Leave a Reply