Cool mirrors for the new Vespas: GTS, GT etc. and Primavera 50 and Sprint 50
New mirrors in black matt with ECE standard for your new Vespa
Black matt is right on trend. With this mirror for the modern Vespa models, we deliver a very high-quality product with a true-to-original look. The special thing about these mirrors is that discreet, high-quality look in matt black.
Of course with E-labeling - approved for road traffic!
TIP: Inexpensive and great alternative for the original part!
Delivery:
- 1 mirror
- Mounting arm
- Fastening material (nut, rubber, etc.).
Available for the following models:
Vespa GTS 125-250-300, GTL 125 etc.
- Mirror Vespa GTS 125-250-300, GTL 125 (ZAPM 31101) - matt black - right / left UNIVESAL!
SKU: 3331420
Vespa Primavera 50/125
- Mirror Vespa Primavera 50 (ZAPC53), Primavera 125 (ZAPM81) - matt black - left-wing
SKU: 3331429 - Mirror Vespa Primavera 50 (ZAPC53), Primavera 125 (ZAPM81) - matt black - right-wing
SKU: 3331428
Vespa Sprint 50/125
- Mirror Vespa Sprint 50 (ZAPC53), Sprint 125 (ZAPM81) - matt black - left-wing
SKU: 3331433 - Mirror Vespa Sprint 50 (ZAPC53), Sprint 125 (ZAPM81) - matt black - right-wing
SKU: 3331432
Chrome mirror Vespa
Do you prefer it 100% in the original look? We also offer this mirror in chrome!
Black mirrors, because: Chrome Won't Get You Home
Black mirrors available for many scooters:
Some mirror rules for those interested.
We have put together some information about mirrors on Vespa / scooters for you:
Required in Germany, according to StVZO §56, any motor vehicle (which also include mopeds) at least one, on the left side of the vehicle mounted mirror. Mirror with E-mark are automatically TÜV compliant because they have a sufficient mirror surface. They are approved in the area of the StVZO. TIP: Vehicles after first registration 01.01.1990 with a registered maximum speed not higher than 100km / h, only need ONE left mirror According to ECE R 81, the mirror must reflect to 69 square cm, and the round mirror must have a diameter between 94 - 150 mm. A circle with a diameter of 78 millimeters must be able to be inserted into non-round mirrors. The external dimensions of the mirror must not exceed 120 x 200 millimeters.
Leave a comment
Participate in the discussion?Leave us your comment!