Vespa exhaust gasket Smallframe Parmakit, Falc, Polini and Co

Vespa exhaust gasket Smallframe

• 7675330 Gasket exhaust manifold / cylinder -VESPA XL, M8 hole punch 55-62mm, Ø inside = 36mm- Vespa V50, PV125, ET3, PK-S-XL
• 7675852 Gasket exhaust manifold / cylinder -VESPA XL, M8 hole punch 55-62mm, Ø inside = 33,5mm- Vespa V50, PV125, ET3, PK S, PK XL

What's new?

• available with an inner diameter of 33,5mm and 36mm
• Suitable for exhaust stud distances of 54mm - 62mm
• Material thickness 1,6mm
• with metal insert

Modern, powerful exhaust systems and cylinders usually also have a corresponding outlet flange diameter. These diameters can no longer be adequately covered with the standard seals.

That is why we have exhaust gaskets / exhaust gasket Vespa for this requirement Smallframe with an inner diameter of 33,5mm (e.g. Ludwig & Scherer Franz and LTH Road) and 36mm (Ludwig & Scherer Big Bertha, Falc, etc). The Vespa exhaust gasket Smallframe has elongated holes for the exhaust studs, which allow a hole stitch of 54mm to 62mm and thus on the current cylinder of Paramkit, Falc, Quattrini and Polini fit.

The material thickness is 1,6mm, so that the often sensitive flange plates of the racing exhaust systems do not dip into the sealing material by tightening the exhaust nuts and thus permanently deform.

Vespa exhaust gasket Smallframe here using the example of one Parmakit SP09 EVO-C

Vespa exhaust gasket Smallframe Parmakit, Falc, Polini and Co