Mirror holder for beautiful mirrors on your Vespa

Vespa mirror with consideration and GO of the style police

Mirrors and Vespa is a tiresome subject. The original MickeyMouse mirrors are not exactly a visual highlight. Functionally, too, they do not always bring the desired benefit. Either the wide scooter driver's cross blocks the view or the powerful motor causes difficulties for the mirrors to hold their position, not to mention the 2-stroke vibrations that are transmitted to the mirror via the long rods. However, mirrors are required by law, with due regard for the lack of consideration, our friends from CMD (Crazy Monkey Development) have now taken on this topic:

CMD MiMo Race - mirror holder for modern mirrors on your Vespa

High quality mirror holder “MiMo Race” from CMD Stainless Steel for all Vespa PK S, PK XL and PX * models.
This innovative mirror holder is attached to the original attachment points (M8 internal thread) attached in the lower part of the handlebar.

By assembling the CMD MiMo Race and its, upwardly positioned boom, you will benefit from the use of modern Spiegel from the motorcycle / scooter sector. These sit at the correct height and are at the correct distance from the switch handle. Literally hugs the contour of the handlebar and thus blends in harmoniously in the overall picture of the scooter.

Snuggling up, harmony, consideration - that's how it has to be: You should love your scooter for the sake of it Order mirror holder here!

Easy construction

The assembly is very simple: Two more are required for mirror assembly M8 screws and washer and / or Snap ring also required in M8.

TIP: Can also be used on many older vehicle types such as Rally, Spint, GT, GTR, TS, GL150 if a distance (equal to one M8 nut) is attached under the holder.

Mount the mirror

The holder has a bore of Ø10mm in 10mm material thickness.
It can thus all mirrors with a thread up to 10mm should be used.
Some mirror types use an internal thread (e.g. Stage 6).
To attach the mirror, please look at the mirror-specific thread and use a suitable screw (Stage6 = M8)

• Material: edged / welded stainless steel
• Mirror mount: Ø10mm, h = 10mm

Available for right and left.

Soon also available for Vespa T5 and Vespa V50

* The right bracket does not fit PX Disc models from 1998 onwards.