THEREFORE ONE LED SKEYSNWERFER AT THE VESPA?
For most scooters, the limit with conventional Bilux light bulbs is a headlight bulb with 45/45 W. The ignitions, which are usually 80 W to a maximum of 120 W, do not provide any more. The luminosity is measured in lumens below 400. The LED headlight has a luminosity that is three times as high (1300 lumens). The power consumption is only 20 W. This corresponds to the light output of a conventional 100 watt spotlight. With a given alternator / power supply, a considerably better illumination can be achieved. In addition, there is more capacity for other consumers.
HEADLIGHT COMPARISON
Evening light, high beam, what is the difference between the LED and standard light?
Mounting
PARTS LIST / SHOP
Parts used in this video:
- LED headlights incl. Vespa PX conversion frame and headlight bracket -MOTO NOSTRA- LED HighPower
Item number: mn1101kt - Ignition switch -VESPA 4-wire- Vespa PX Lusso (from 1984)
Item number: 9520133 - Light switch -GRABOR- Vespa PK125 XL / ETS, Vespa PX Elestart (1984-1998) - 10 cables (DC, models with battery, make contact)
Item number: 9520145 - Rubber flasher relay Vespa PX
Item number: 3330940
NOTE
The LED headlight works exclusively with direct current, so it requires a battery or another equivalent power source with 12V DC. Operation on an alternating current voltage source leads to an immediate defect.
Assembly instructions for Print out as PDF