Posts

Vespa PK Lusso speedometers available

Vespa PX Lusso and PK Tachos 105mm available again

, , ,

Replacement for Vespa PX Lusso speedometer

If a speedometer on the PX / PK Lusso models was defective, in recent years you had to use one broken speedometer to be satisfied. If available at all, with a lot of luck and at horrendous prices, you could possibly still get a used copy on the parts market.

At least for the speedometer glass, we already had one for one Speedometer glass repair kit taken care of by bgm. And for the older PX models there is the Speedometer for Vespa PX from bgm great replacement.

Lusso speedometers now available again

They are new now Replica speedometers for PX Lusso So the later Vespa PX models from 1998-2016 and Vespa PK S Lusso, PK XL and ETS models.

OEM quality

These premium speedometers are made by the same manufacturer who also produces the speedometers for the Vespa PX Millenium / My models for Piaggio!

 

Order OEM speedometer for PX Lusso here
Premium Vespa speedometer for Vespa PX Lusso and PK - OEM original equipment manufacturer quality

Speedometer for Vespa PX Lusso (1984-) - also suitable for Vespa PK

These ready-to-install speedometers are a very good reproduction of the original Piaggio speedometer of the Vespa PX models from 1984 (Lusso / EFL / Iris), which has not been available for a long time.

We offer these models in different versions:
PX Lusso with original 120km/h Scaling as well as with 160km/h Scala, the speedometers are also available with a black ring (like the original) or a chrome-plated speedometer glass ring.
Vespa PK with 80 km / h or 120 km / h speedometer sheet.

Vespa Premium Speedometer PX Lusso & PK Lusso

 

These speedometers also fit the later Vespa PX models from 1998-2016 and they can also be used in the Vespa PK S Lusso, PK XL and ETS models.

 

TIPP:

Great replacement and top quality at a fair price, with a very successful, almost original look!

Order OEM speedometer for PX Lusso here
/by
Vespa PX old speedometer up to 160km / h from bgm PRO

Vespa PX old speedometer up to 160km / h

,

Vespa PX old speedometer up to 160km / h from bgm PRO

Vespa PX old Speedometer bgm PRO 160km / h for Vespa PX up to ´84 

That's the bgm PRO speedometer up to 160km / h for the old Vespa PX with the small speedometer without fuel gauge. A precise eddy current measuring mechanism with a Display range up to 160km / h makes it so special! The series speedometer only has to offer 120km / h.

This high-quality precision speed indicator for your Vespa replaces 1: 1 the speedometer installed by Piaggio at the factory.

Vespa PX speedometer 160km / h bgm PRO - speedometer for old Vespa PX up to 160 km / h

Why does a Vespa PX need a speedometer up to 160?

In our shop (https://www.scooter-center.com) you also get engine tuning and transmission technology that bring your series tachometer to its limit in second or third gear - we feel responsible, you too a corresponding speedometer to offer.

Your Vespa doesn't even drive a 160?

So what!? As a child, did you always press your nose to the windshield to check the speedometer to see how fast the car could go? With the 160 bgm speedometer - your scooter is already driving at level 160. Too much of a good thing for you? Of course we also have Speedometers up to 120km / hwhich are also perfect for a clean original restoration.

Now drive here with a Click 160

 

Original optics

Tip: The classic appearance is retained, the existing speedometer cable and the original speedometer pinion can simply continue to be used.

You can therefore find this speedometer as a spare part in our exploded view drawings:

Suitable for the following Vespa and Motovespa models, for example:

/by
Speedometer worm for Vespa V50 with 9 inch rims

Speedometer drive Vespa V50 9 inch

, ,

Speedometer worm for Vespa V50 with 9 inch rims

The spare parts for the speedometer drive were no longer available for a long time, now we have had them reissued for you.

Immediately in Scooter Center Shop individually or as a set available:

Speedometer drive Vespa V50 9 ″ in the set 1079157KT

Speedometer screw set -SCOOTER CENTER- Vespa 10 teeth, Ø = 21,8mm, metal + 9 teeth, l = 31mm, 2,7mm square, black (suitable for speedometer worm 9 teeth) - (used in Vespa V50, 50N, 50L, 50R (V5A1T, 9 inch Tire))

Vespa speedometer worm set-1079157KT (3)Vespa speedometer worm set-1079157KT (3)
Vespa speedometer worm set-1079157KT (1)Vespa speedometer worm set-1079157KT (1)
Vespa speedometer worm set-1079157KTVespa speedometer worm set-1079157KT
Buy speedometer screw set

 

Speedometer worm 1079157A corresponds to Piaggio 79158

Speedometer worm -SCOOTER CENTER- Vespa 9 teeth, l = 31mm, 2,7mm square, black (used in Vespa V50, 50N, 50L, 50R (V5A1T, 9 inch tires)

speedo-screw-vespa-9-inch_1079157A_2speedo-screw-vespa-9-inch_1079157A_2
speedo-screw-vespa-9-inch_1079157A_1speedo-screw-vespa-9-inch_1079157A_1
speedo-screw-vespa-9-inch_1079157Aspeedo-screw-vespa-9-inch_1079157A
Buy speedometer worm

Speedometer worm on shaft 1079157B corresponds to Piaggio 79157

Speedometer worm on shaft -SCOOTER CENTER- Vespa 10 teeth, Ø = 21,8mm, metal (suitable for speedometer 9 teeth) - (used in Vespa V50, 50N, 50L, 50R (V5A1T, 9 inch tires)

Vespa-speedometer-worm-on-shaft-1079157B (3)Vespa-speedometer-worm-on-shaft-1079157B (3)
Vespa-speedometer-worm-on-shaft-1079157B (1)Vespa-speedometer-worm-on-shaft-1079157B (1)
Vespa-speedometer-worm-on-shaft-1079157BVespa-speedometer-worm-on-shaft-1079157B
Buy speedometer worm on shaft

Our tip: replace the speedometer cable immediately:

Speedometer cable bgm PRO Vespa V50

BGM PRO Speedometer cables correspond to the factory specification and impress with their high quality and low price. All speedometer cables have vehicle-specific lengths and can therefore be installed directly without reworking. Particular attention was paid to high-quality details such as a high-quality outer shell or a properly pressed square. The installation of the already Ready-to-install greased speedometer cable can be carried out quickly and easily.

Speedometer cable_vespa_v50-BGM6440SCSpeedometer cable_vespa_v50-BGM6440SC
Speedometer cable_vespa_v50-BGM6440SC (3)Speedometer cable_vespa_v50-BGM6440SC (3)
Speedometer cable_vespa_v50-BGM6440SC (2)Speedometer cable_vespa_v50-BGM6440SC (2)
Speedometer cable_vespa_v50-BGM6440SC (1)Speedometer cable_vespa_v50-BGM6440SC (1)
Buy speedometer worm on shaft

Speedometer cable Vespa Suitable for:

Vespa

  • 50 L (V5A1T)
  • 50 N (V5A1T)
  • 50 (V5A1T - 1963)
  • 50 S (V5A1T - 1964)
  • 50 Special (V5A2T)
  • 50 Special Elestart (V5A3T)
  • 50 Special (V5B1T)
  • 50 Special Elestart (V5B2T)
  • 50 Special (V5B3T)
  • 50 Special Elestart (V5B4T)
  • 50 Sprinter (V5SS2T - 1975)
  • 50 SR (V5SS2T - 1975-)
  • 90 (V9A1T)
  • 90 Super Sprint (V9SS1T)
  • 125 Nuova (VMA1T)
  • 125 Primavera (VMA2T)

Vespa V50 speedometers You can of course also get from us: Vespa V50 speedometer cheap

 

/0 Comments/by

Speedometer glass for Vespa PX Lusso, PK XL and Vespa GT & GTV

, ,

Replace the speedometer glass on the Vespa PX Lusso?

For years there was no way that Speedometer glass Easy to swap with the Vespa PX Lusso. With a broken speedometer dial the same had to be complete speedometer be exchanged and that is of course quite expensive. Until recently the situation became more and more dramatic because the speedometers for the first Vespa PX-Lusso are no longer new and the second-hand market often only offers defective speedometers. The susceptible Asian replica disco digital speedometers are also not to everyone's taste.

Speedometer glass set for easy replacement

We now have a speedometer glass set, consisting of a speedometer glass and a speedometer ring. The glass (made of plastic) is optionally available in clear (like the original) or with tinted glass, the ring is available in black and chrome.

Speedometer glass Vespa PX Lusso gt gtv

The speedometer glass also fits the Modernvespa models: Vespa GT and Vespa GTV!

Easy installation of the new speedometer glass

To change the speedometer disc, the old speedometer must first be removed from the handlebar cover. The ring is then opened around the bottom with a fine screwdriver, for example, until it can be pulled off the speedometer housing. Now the speedometer ring can be removed together with the glass and easily replaced with the new parts.

To attach the new ring, the best thing to do is to lay the speedometer with the glass facing down on a table with a soft cloth as a base and carefully bead the speedometer ring again. A small rubber mallet or a piece of wood / plastic is suitable for this.

You can now repair your speedometer easily and cheaply

TIPP: Before installing the speedometer in the cover, we recommend that you do the same rubber seal to replace. This seal between Tachometer and Steering head prevents moisture from penetrating the handlebar head. This keeps the electrical system, shift and gas pipe protected from splashing water and prevents the Bowden cables and power cables from corroding.

 

Gasket for speedometer / steering head cover

The speedometer dial set fits the following vehicles:

  • Vespa
    • Vespa GTV 125
    • Vespa GTV 250
    • Vespa GTV 300
    • Vespa GTV 300ie Vie della Moda (2012, ZAPM 45201)
    • Vespa GTV 300ie Via Montenapoleone (ZAPM 45201)
    • Vespa GT 60 250ie
    • 80 PX E Lusso Elestart (V8X1T - 1984-1990)
    • 150 PX E Lusso (VLX1T - 1984-97)
    • 125 PX E Lusso (VNX2T - 1984-97)
    • 200 PX E Lusso (VSX1T - 1984-97)
    • 125 PX E Lusso (ZAPM09300 - Bj.'98-'00)
    • 125 PX E Lusso (ZAPM09302 - Bj.'01-'10)
    • 150 PX E Lusso (ZAPM09400 - Bj.'98-'00)
    • 150 PX E Lusso (ZAPM09401 - Bj.'01-'10)
    • 200 PX E Lusso (ZAPM18 - 1998-)
    • 50 PK XL (V5X3T)
/0 Comments/by