Posts

Engine silent block set -BGM PRO Touring- Vespa PK 50-125, PK 50-125 S, PK 50-125 XL bgm Pro Item no .: BGM7954

New engine silent block sets for Vespa PK

Motor Silentblock Vespa PK? A red Vespa PK 50S was my first Vespa. Between us: I've had almost everything on the scooter in my hand and swapped - just that Motor silent rubbers I never noticed! Why also? Back then the scooters were quite fresh by today's standards.

Today, 30 years later, the PK models are among the classic cars. Vehicles are being restored and now you should also have a look at the engine silent blocks!

We offer you optimized sets that are also easy to assemble!

Vespa PK Motor silent block rubbers Original, Touring & Sport

With the new bgm silent block sets we are expanding the product range in the area of ​​high-quality and innovative spare parts:

 

Motor Silentblock Vespa PK "Original"

Silent block set engine -BGM ORIGINAL- Vespa PK 50-125, PK 50-125 S, PK 50-125 XL bgm original item no .: BGM7954OG

The original set BGM7954OG corresponds to the Piaggio original part in terms of material and handling.
Here are both silent blocks with red characterized.

Buy Vespa PK silent rubber ORIGINAL

Motor Silentblock Vespa PK "Touring"

Engine silent block set -BGM PRO Touring- Vespa PK 50-125, PK 50-125 S, PK 50-125 XL bgm Pro Item no .: BGM7954

The set BGM7954 Touring is delivered with two different degrees of hardness, right and left, and combines the best vibration dampening and tracking for road use. The touring set has a silent block marked on the right-hand side green and on the left a silent block with the red Marking used. The slightly tougher silent rubber on the right side helps keep the weight of the engine on track.

Buy Vespa PK silent rubber TOURING

Motor Silentblock Vespa PK "Sport"

Silent block set engine -BGM PRO Sport- Vespa PK 50-125, PK 50-125 S, PK 50-125 XL bgm Pro Item no .: BGM7954SP

The set BGM7954SP Sport is intended for racing, the sporty driver on the road and for vehicles with significantly more powerful engines that require more rigid control on the hindquarters when accelerating.

The silent blocks from the sports set are included green .

Buy Vespa PK silent rubber SPORT

Easier assembly

There are two different silent rubber systems for the PK models:

Type 1: Two inserted silent blocks, each with a short vulcanized steel tube (like the BGM silent rubbers)

Type 2: A long tube and pressed-in rubbers that are secured to the tube by means of a locking ring.

The BGM silent rubbers are suitable for both types. With Type 1, the old rubbers can simply be removed from the housing (levered out). With type 2 the caulked retaining rings of the pipe must be removed, the pipe must be pushed out and the rubbers must be levered out. Then mount the new BGM PRO rubbers dry, (some talc can help here) push them back into the housing and, if necessary, re-insert them with a hammer that does not kick back.

In the past, you might have to go to the “specialist workshop”, which had special tools to pull in the new PK motorized rubber seals. If that was too expensive for you, you somehow removed the old silent blocks and then installed the V50 silent rubbers, but they were too long and not ideal for the PK engine. With the two-part motorized silent rubbers from bgm, you can now assemble the perfect silent rubber compound for your area of ​​application yourself!

This is an advantage of the bgm silent rubbers: the split design of the silent blocks simplifies assembly considerably.

Silentblock Vespa - new sets for Vespa PK

Silent block Vespa silent rubber

Optimized asymmetrical silent blocks by bgm PRO

The engine of your Vespa requires two different engine mountings, the one for the right side (heavy engine side) and the other for the left side (light exhaust side).

We developed the optimized silent blocks for Vespa Smallframe and Largeframe, as well as for the Lambretta. Thesis silent blocks are now also available for Vespa PK.

bgm PRO silent blocks

  • more ride comfort
  • high tracking
  • high steering precision
  • high stiffness

The bgm PRO silent blocks give much better handling thanks to a more precise guidance of the engine in the engine casing. the information rubbers have an asymmetrical shape degree of hardness. Therefore, even with stiff suspensions, you can still have a good one ride comfort.

Thanks to the reinforced engine mountings, available in set, you have better tracking, steering precision and stiffness. The fitting is easy and their replacement is recommended eg during the engine overhaul.

Further information on the bgm PRO silent blocks for Vespa

Replace the silent blocks of your Vespa!


Easy fitting

Vespa PX 200, V50, PV125 ET3, PK

These models feature inserted rubbers. Remove the old rubbers from the engine casing.
Put the new bgm PRO silent blocks in the engine casing using a little bit of talcum.

Vespa PX80-150, Sprint, VBB, etc.

These models feature standard pressed silent blocks.
To get these out of the casing you have to grind, cut or drill off the ends. Then you take off the tube and rubbers from the casings. Put the new bgm PRO rubbers into the casings using a little bit of talcum.

notice

Please do not grease or oil the new rubbers. Mount them dry and use talcum to ease up the fitting.

Please note

The silent blocks are mounted according to the side of the riding direction:

  • In riding direction, left hand side: marked red
  • In riding direction, right hand side: green marked

Silent block set engine -BGM PRO- Vespa Small- and Largeframe

Silent block Vespa silent rubber

Silent block asymmetric bgm PRO ottimizzati

Per the motore della Vespa è necessario utilizzare silent block differentials, uno per il lato destro (lato motore più pesante) and uno per il lato sinistro (lato marmitta più leggero). Abbiamo progettato già tempo fa i silent block ottimizzati by Vespa, compatible per i models Largeframe, Smallframe and for Lambretta. Ora il kit silent block bgm PRO è also available per the Vespa PK.

Tampons bgm PRO

  • greater comfort di guida
  • elevata directionality stability
  • elevata precisione di sterzata
  • high stiffness

I silent block bgm PRO migliorano la guida grazie ad un alloggiamento nettamente più preciso nel telaio. I. tamponi rinforzati present a Grado di durezza asymmetrico e quindi, even with rigid sospensions, guarantees comfort and comfort throughout the stay.

Grazie alla coppia di silent block rinforzati, la guida migliora nella stabilità direzionale, precisione di sterzata e rigidezza. The montaggio è semplice e ideal da effettuare in concomitanza with a revisione al motore.

Maggiori informazioni sui silent block bgm PRO by Vespa

Acquista qui i silent block by Vespa


Simple assembly

Vespa PX 200, V50, PV125 ET3, PK

Questi models dispongono di tamponi interposti. Estrarre i vecchi tamponi dal carter.
Advertise i nuovi silent block bgm PRO nel carter utilizzando del talco.

Vespa PX80-150, Sprint, VBB, etc.

Questi models dispongono silent block di series pressati.
Forare / tagliare le estremità chiuse dall'asse. Estrarre tubo e tamponi dal carter.
Advertisement i nuovi silent block bgm PRO nel carter aiutandosi con del talco.

Warning

I silent block vanno montati asciutti, non ingrassarli né oliarli. Via facilitare il montaggio utilizzare del talco.

Note

I silent block vanno montati in base alla direzione.

  • Direction di marcia, lato sinistro: silent block con segno rosso
  • Direzione di marcia, lato destro: silent block con segno verde

Set di silent block motors -BGM PRO- Vespa Small- e Largeframe

Silent block Vespa silent rubber

Load-optimized asymmetrical silent blocks from bgm PRO

It remains to be seen whether you need different stockings for your left and right foot. One thing is certain: you need different silent blocks in the engine for right (heavy engine side) and left (lighter exhaust side).

We have these tweaked Vespa silent blocks developed and have been offering these for a long time Vespa Largeframe and Smallframe and also Lambretta on. The bgm PRO is new Silent block set for Vespa PK.

bgm PRO silent rubbers

  • more driving comfort
  • high directional stability
  • high steering precision
  • high rigidity

The bgm PRO silent rubbers improve the driving behavior through a much more precise guidance of the motor in the frame. the reinforced rubbers have asymmetrical degrees of hardness. Therefore, despite the tighter suspension, the driving comfort obtained.

With the reinforced bgm motor silent rubbers supplied in pairs, the chassis gains directional stability, steering precision and rigidity. The assembly is simple and is ideal, for example, in the course of an engine overhaul.

More information about the bgm Pro silent blocks for Vespa

Replace the Vespa silent block


Easy construction

Vespa PX 200, V50, PV125 ET3, PK

Have inserted rubbers. Remove the old rubbers from the housing (lever out).
Push the new BGM PRO rubbers back into the housing with a little talcum powder.

Vespa PX80-150, Sprint, VBB, etc.

These models use rubber pressed ex works.
Drill / flex off the caulked axle ends here. Remove the tube and rubbers from the housing.
Push the new BGM PRO rubbers back into the housing with a little talcum powder.

Note

Mount the silent rubbers dry, do not grease / oil. Use talcum powder for easier assembly.

Please note

The rubbers are to be installed in a direction-specific manner.

  • Left in the direction of travel: red color marking
  • Right in the direction of travel: Green color marking

Silent block set engine -BGM PRO- Vespa Small- and Largeframe

Vespa silent block

Hand on heart - do you ever have that on your Vespa Replaced silent blocks? Unfortunately, this is usually neglected even with complete restorations.

After many, faithfully completed kilometers, it sometimes happens that when you look at the most beautiful rear part in the world you notice that something is wrong here.

If the rear wheel is tilted slightly to the side when viewed from the rear in the direction of travel, then you have vibration, also called silent blocks, put their prime behind them in the motor housing.

Why silent rubbers?

The silent rubbers do not have an easy task: they are supposed to be uncomfortable vibrations Eliminate the drive train swing arm and at the same time for a predictable and safe leadership of the rear wheel. Because the silent rubber on the right-hand side also has to carry a large part of the mass of the engine, this side is subject to greater stress and is therefore also subject to greater wear.

This problem should be solved with a fresh set of silicone rubbers - do you think ...

Beware of the "OEM quality"

In the meantime, let's call them “other” suppliers have apparently found their way into the Piaggo bag.
The original silent rubbers are sometimes so soft that the engine is tilted back in the frame due to its own weight. This condition does not improve under a load, i.e. with the driver. Due to worn or too soft silent blocks, brisk Vesps sometimes also tend to oscillate significantly in the longitudinal axis even at higher speeds.

The solution: load-optimized silent blocks

So we have the bgm PRO silent blocks Equipped with a somewhat tougher rubber and the more heavily loaded engine side has also been chosen one step tighter.

The firmer, right-hand side thus stands in the way of the motor's own life and the increased load, and ensures that the drive train swing arm is guided safely.

The bgm PRO silent blocks for Vespa engines are therefore color coded:

BGM7952 (1)

  • GREEN is the somewhat firmer silent rubber for the right side in the direction of travel
  • RED is the silent block for the left side.

 

Vespa silent block

 

 

Simple assembly of the silent blocks

We decided on the two-part solution for the design of the silent blocks.

This makes the assembly of the silent rubbers much easier.
To use the rubbers is suitable Tire fitting paste pretty good.
Fat should not be used.

So far we have been offering the silent blocks for the following Vespa models:

 

BGM7955

Engine silent block set -BGM PRO- Vespa V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL

BGM7955

 

BGM7951

Engine silent block set -BGM PRO- Vespa PX80, PX125, PX150, Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T),
GTR125 (VNL2T), Super, GL150 (VLA1T), VNA, VNB, VBA, VBB

 

BGM7951

 

BGM7952

Engine silent block set -BGM PRO- Vespa PX200

BGM7952

BGM7954

Engine silent block set -BGM PRO- Vespa PK 50-125, PK 50-125 S, PK 50-125 XL

Silent block Vespa silent rubber

Silent rubber shock absorber mount Vespa

Tip: As optimal addition We also offer the silent rubbers in the motor cross-member the silent rubber for the rear lower shock absorber mounte at.

1157103 (2)

The wide rubber optimally supports the damper and is contrary to the narrow-chested competitors significantly more resistant to wear and tear.
The rubber is available in a set with the most common silent block sleeves:

Lambretta silent blocks

We have been offering Sinlentblock sets for fans of Lambretta tracked vehicles for a long time.
The positive experience from development the different hardness of the silent rubbers, we have also incorporated into the silent block sets of the Vespa.

BGM7950G

Silent block set engine -BGM PRO- Lambretta LIS, SX, TV (series 2-3), DL, GP - 29cm engine bolts

 

ImageDocument BGM7950G