New carburetor connection rubbers from bgm PRO
The 12mm wide hose clamps from ABA SAFE have proven themselves in countless long and short distance races and test kilometers.
The ABA Safe ™ clamp uses the elasticity of the suction rubber and protects this relatively soft rubber hose from damage. The tensioning force is increased on the profile beads, there are no sharp edges, which means that the 12mm wide clamps sit tightly without stressing the carburetor connection rubber.
We have new ones now bgm connection rubbers that are wide enough to neatly accommodate these 12mm wide hose clamps.
Another benefit is that our bgm connecting rubbers from the carburetor to the intake manifold from one very oil and gasoline tolerant material are made.
That makes the carburetor connector rubbers a top reliable and durable part on your scooter.
Available sizes & conversion rubber
- 28,5 mm Connection rubber carburettor / intake manifold -BGM PRO- AW = 28.5 / 28.5mm
- Polini CP
- 30 mm Connection rubber carburettor / intake manifold -BGM PRO- AW = 30 / 30mm
- Dellorto PHBL
- MikuniTM 24
- 35 mm Connection rubber carburettor / intake manifold -BGM PRO- AW = 35 / 35mm
- Dellorto PHBH 28/30
- Dell Orto VHST 24-36
- Dell Orto VHSH 30
- MikuniTM 28
- Mikuni TMX 27/30
- Keihin PWK 28/30
- Polini 28/30
- 40 mm Connection rubber carburettor / intake manifold -BGM PRO- AW = 40 / 40mm
- Mikuni TMX 32-35
- Keihin PWK 33-35
- Koso 28-34
- 35 / 40mm Conversion rubber connection between carburettor and intake manifold -BGM PRO- AW = 35 / 40mm
- 35 mm
- 40 mm
- Carburetor and intake manifold should be thoroughly degreased before assembly.
- The 12mm ABA SAFE hose clamps should also not be over tightened.