USB socket 12V 2x USB, blue illuminated

In addition to the USB double socket From bgm PRO we now have this cool blue illuminated and of course waterproof USB socket on offer:

USB double socket, waterproof -UNIVERSAL-

This great USB socket with two USB slots for connection to a 12V or 24V motorcycle, scooter, scooter, ATV or car battery.

Waterproof encapsulated and can therefore also be used in boats or in camping / outdoor areas! Perfect for charging devices such as mobile phones, smartphones, notebooks, iPads, iPhones, iPod touches, Sony, Nokia, HTC, Samsung, GPS, MP3 players, PDAs, etc. on board any vehicle with a 12-24 volt electrical system.

The socket can, for example, be built into the glove compartment or helmet compartment - or freely mounted on the handlebars.

There are two USB slots on the front. With a single assignment, a socket has 5V / 2.1A. If both slots are occupied, 5V / 1.0A are available at each output.

Illuminated in blue

The slots are easily recognizable even in the dark thanks to a permanently switched blue background lighting (LED).

Technical data:

Output voltage: 5V DC +/- 5%
Input voltage: 12V-24V DC +/- 4V
Maximum output current: 2.1A DC
Mounting hole diameter: 29mm
Installation depth (overall length): about 60mm
Cable length approx 145cm
Width clamp: 39mm
IP65 protected (completely dustproof + protected against water jets)
Incl. Fuse holder with blade fuse

Including handlebar bracket for handlebars up to 7/8 "(22,2mm), rubber protection cap.

Easy construction

The connection is made to the ignition lock-switched positive cable of the wiring harness (red cable to live cable when ignition is on, black cable to earth / frame).

Here it goes to the USB sockets

USB socket 12V, double socket, waterproof

USB double socket, waterproof - BGM Pro- input voltage = 12V DC, output voltage = 5V DC / 3.1A - 1x 2,1 A USB - fast charging socket + 1x 1,0A USB fast charging socket - for level installation and handlebar 7/8 ″ And 1 ″

Perfect for charging devices such as mobile phones, smartphones, notebooks, iPads, iPhones, iPod touches, Sony, Nokia, HTC, Samsung, GPS, MP3 players, PDAs etc. on board any vehicle with a 12 volt battery. Easily integrated into the 12V system, there are two USB slots with 1x 5V / 2.1A (fast charging socket) and 1x 5V / 1.0A on the front.

Technical data:

Output voltage: 5V DC +/- 5%

Input voltage: 12V DC

Maximum output current: 3.1A DC

Mounting hole diameter: 37mm

Installation depth (overall length): about 40mm

Cable length approx 170cm

IP66 protected (completely dustproof + protected against powerful water jets)

usb-double-socket-waterproof-12V-BGM6800

Delivery:

Incl. Handlebar bracket for handlebars with 7/8 "(22,2mm) to 1" (25,4mm),

Rubber cap and

Installation instructions (English).

Easy connection:

Anyone can do that: The connection is either directly to the battery (red cable to battery +, black to ground / frame) or with an ignition switch (red cable to live cable when ignition is on, black cable to ground / frame). Note for Apple devices: All Apple devices must use the USB socket with 1.0A to use the fast charging mode (the only exception is the iPad, please connect this to the 2.1A).

Buy a USB socket 12V here

Posts

USB socket waterproof and illuminated

USB socket 12V 2x USB, blue illuminated