Posts

bgm PRO rectifier for Vespa

, ,

New rectifier for Vespa (horn rectifier) ​​bgm PRO

Vespa rectifier bgm PRO: the genuine Piaggio rectifier for Vespa PX and PK is no longer produced by Piaggio, but no worries! Here we present you our new bgm PRO rectifier for Vespa scooters with 12V alternating current (AC) on-board voltage.

Much more than a replacement for the genuine rectifier!

The newly developed bgm PRO rectifiers are already available in our online shop. Here some of the technical features:

  • Horn rectifier as replacement for the genuine rectifier for Vespa PX / PK no longer in available from Piaggio
  • Internal cutout as a protection against short circuit
  • Integrated blinker relay for LED indicators (completely load independent !!)
  • USB output for mobile phone or sat nav
  • Made in Germany (all items individually tested and supplied with a test protocol)
Vespa rectifier BGM6710Vespa rectifier BGM6710
Vespa rectifier BGM6710KT2 (3)Vespa rectifier BGM6710KT2 (3)
Vespa rectifier BGM6710KT2 (2)Vespa rectifier BGM6710KT2 (2)
Vespa rectifier BGM6710KT2 (1)Vespa rectifier BGM6710KT2 (1)
Vespa rectifier BGM6710KT2Vespa rectifier BGM6710KT2
Vespa rectifier BGM6710KT1 (4)Vespa rectifier BGM6710KT1 (4)
Vespa rectifier BGM6710KT1 (3)Vespa rectifier BGM6710KT1 (3)
Vespa rectifier BGM6710KT1 (2)Vespa rectifier BGM6710KT1 (2)
Vespa rectifier BGM6710KT1 (1)Vespa rectifier BGM6710KT1 (1)
Vespa-rectifier-bgm6710kt1Vespa-rectifier-bgm6710kt1

Use of the rectifier

The bgm PRO horn rectifier is designed for installation in vehicles with 12V alternating current (AC) on-board voltage and its usage is not limited to Vespa and / or PX / PK. The rectifier is not earth-connected, which means that current flows directly to the horn (via switch) and the horn output can be connected directly to the vehicle frame.

Completely load independent LED turn signal relays are not easy to find. The integrated relay also works with LEDs which consume less thanks to 1W.

Charge mobile phone and sat-nav from your Vespa

Now you can charge your mobile phone or sat-nav while on ride and without battery. Just connect the rectifier output to the USB charger (12V) and the charger's grounding output to the frame. The device will be loaded with up to 3A - this is sufficient for most devices for a charge from 0 to 100% in 60 minutes (the charging is disconnected when blowing the horn).

USB socket for Vespa

 

Smaller mounting shape

The bgm PRO horn rectifier is much smaller than the genuine Piaggio or replicas. It can also be used on older vehicles with conversion to 12V on-board voltage without having to replace the genuine horn with an AC horn.

 

bgm PRO horn rectifier - specifics:

The BGM Pro horn rectifier is a high-quality replacement of the genuine part of the Vespa PK, PX, T5 and Cosa models which is no longer produced by Piaggio. Furthermore, this rectifier also has an integrated blinker relay for LED indicators and a USB output.

  • Controlled direct current output for horn (12V DC)
  • 12V USB output up to 3A charging capacity
  • 12V turn signal relay for LED indicators
  • Internal, temporary security cutout if more than 2A power flows
  • Each rectifier is individually tested and supplied with a test protocol
  • Only for on-board 12 volt alternating current (AC)
  • Designed and MADE in Germany

The bgm PRO rectifier is not just a replacement, since it has a rectifying function for direct current horn you don't have to fit a horn with alternating current. While on ride you can charge efficiently your devices such has mobile phone or sat-nav. LED indicators can be directly connected to the rectifier and hence you don't need to mount the conventional blinker relay. The rectifier can be perfectly used with the bgm PRO complete wiring loom (for conversion to 12V and electronic ignition for Vespa V50, PV, Sprint, Rally, VBB, etc).

Available in three versions:

  • BGM6710KT1 - with adapter wire for integration in already mounted wiring loom incl. Waterproof connector plugs
  • BGM6710KT2 - with connector plugs for single wiring with direct connection to the rectifier
  • BGM6710 - version without connector plugs (as replacement for items BGM6710KT1 / KT2 or if a connector plug is already mounted)

Further information about the rectifier are here: horn rectifier for Vespa - fitting instructions

PLEASE NOTE: the rectifier cannot be used to charge a 12V battery

Buy here Vespa rectifier

These items may also interest you:

USB charger, dual port, round, waterproof - bgm PRO

USB charger, dual port, waterproof -OEM QUALITY

Voltage regulator

/0 Comments/by

Vespa rectifier bgm PRO

, ,

New rectifier for Vespa (horn rectifier) ​​bgm PRO

Vespa rectifier bgm PRO: With the new bgm PRO horn rectifier for Vespa 12V, we finally offer you a replacement for the Piaggio horn rectifier for Vespa PX and Vespa PK, which has not been available for a long time.

Much more than just a replacement for the original rectifier!

The newly developed bgm PRO rectifiers are from now on In Stock. Here are a few highlights:

  • Horn rectifier as a replacement for the PX / PK part that is no longer available.
  • Internal shutdown as protection against short circuits
  • Integrated relay for LED indicators. (Absolutely load-independent !!)
  • USB charging output for mobile phone or navigation system
  • Made in Germany (Each part is individually checked manually and is delivered with a protocol.)
Vespa rectifier BGM6710Vespa rectifier BGM6710
Vespa rectifier BGM6710KT2 (3)Vespa rectifier BGM6710KT2 (3)
Vespa rectifier BGM6710KT2 (2)Vespa rectifier BGM6710KT2 (2)
Vespa rectifier BGM6710KT2 (1)Vespa rectifier BGM6710KT2 (1)
Vespa rectifier BGM6710KT2Vespa rectifier BGM6710KT2
Vespa rectifier BGM6710KT1 (4)Vespa rectifier BGM6710KT1 (4)
Vespa rectifier BGM6710KT1 (3)Vespa rectifier BGM6710KT1 (3)
Vespa rectifier BGM6710KT1 (2)Vespa rectifier BGM6710KT1 (2)
Vespa rectifier BGM6710KT1 (1)Vespa rectifier BGM6710KT1 (1)
Vespa-rectifier-bgm6710kt1Vespa-rectifier-bgm6710kt1

Areas of application of the horn rectifier

The rectifier works in any 12V AC environment and is not limited to Vespa and / or PX / PK. The rectifier is NOT referenced to ground. This means that the current (via the switch) can be conducted to the horn - and the mass of the horn can be placed directly on the scooter frame.

Really load-independent LED flasher relays are difficult to find. The integrated relay also works with LEDs that consume well below 1W power.

Charge your mobile phone or GPS to your Vespa

Charge your mobile phone or GPS on the go - without the annoying battery. Simply the loading output of the Rectifier to the USB charging socket (12V) and place the ground pole of the charging socket on the frame. Your end device is charged with up to 3A - this is enough for most devices for a charge from zero-> 100% in 60 minutes. (The charging function is switched off while the horn is sounding.)

USB socket for Vespa

 

Small construction - great potential for use

The bgm PRO horn rectifier is significantly smaller than the original Piaggio part or its replicas. It can therefore be easily accommodated in the case of 12V conversion conversions of older scooters. With the 12V conversion, nobody has to do without the original horn in favor of a buzz.

 

The bgm PRO horn rectifier at a glance

The BGM Pro horn rectifier is a high-quality replacement part for the Piaggio horn rectifier of the Vespa PK, PX, T5 and Cosa models, which is no longer in production. In addition, it has an integrated blink relay for LED blinkers and an output for USB sockets.

  • Regulated DC output for the horn (12V DC)
  • 12V USB charging output with up to 3A charging power
  • 12V flasher relay for LED indicators
  • Internal, temporary safety shutdown if more than 2A is requested at an output
  • Each rectifier is tested individually and is delivered with a test report
  • only for 12 volt alternating current (AC) on-board voltage
  • Designed and MADE in Germany

In addition to the function as a spare part, the BGM Pro horn rectifier enables the use of a horn instead of a (no longer permitted chatter = alternating current horn) on your oldie.
While driving, it offers the possibility to charge your navigation system or mobile phone very effectively. LED indicators can be connected directly to the rectifier, a conventional flasher relay is no longer required. This makes it a perfect addition to the bgm PRO Conversion wiring harness (to convert to 12V and electronic ignition for Vespa V50, PV, Sprint, Rally, VBB, etc.)

Available in three versions:

  • BGM6710KT1 - With adapter cable set for free integration into an existing cable harness including a waterproof connector set
  • BGM6710KT2 - With connector for individual cabling with direct connection to the rectifier
  • BGM6710 - Version without connector (as a replacement for BGM6710KT1 / KT2 or if a connector is already available)

You can find a detailed technical description here: horn-rectifier-vespa-installation-instructions-

NOTE: The rectifier is NOT suitable for charging a 12V battery

Order your Vespa rectifier HERE

USB socket waterproof and illuminated

USB socket 12V waterproof

New voltage regulator Vespa & Lambretta / universal

/0 Comments/by
Smartphone holder (up to 5,5 ") -MRP- universal for hand-switched Vespa models - mounting under handlebar on mirror screw connection

Smartphone holder for Vespa scooters

Smartphone holder for Vespa

Navigation systems and cell phones are an indispensable part of our lives. I think it is very smart to use the smartphone with GPS as a navigation system. But what to do with the expensive smartphone so that it can be used and safely stored and how is it charged?

Here you can find out how to best use a smartphone on the Vespa.

With this holder All smartphones up to 5,5 ″ display size can be mounted on all Vespa models that have two M8 threads for a rearview mirror screw connection under the handlebar (e.g. Vespa PX, T5, Sprint, V50, Primavera ...).

  • Smartphone pocket made of neoprene, splash-proof
  • Up to 5 ″ smartphones, e.g. Samsung Galaxy S5, IPhone 6 ...
  • Stainless steel holder
  • Screw connection with wing screws. This means that it can be dismantled quickly and without tools
  • The smartphone can be easily and quickly removed from the side of the pocket
  • The touchscreen can still be operated

Smartphone holder (up to 5,5 ") -MRP- universal for manually switched Vespa models - mounting under handlebar on mirror screw connection

Smartphone holder (up to 5,5 ″) -MRP- universal for hand-switched Vespa models - mounting under handlebar on mirror screw connection

Delivery:

  • stable and extremely durable retaining plate made of rust-free stainless steel
  • Splash-proof smartphone pocket made of neoprene
  • Wing screws and spacer sleeves for perfect attachment to the handlebar

Also available oWithout neoprene pocket and for smaller smartphones / cell phones -> 5 ″ displays .

Charge the cell phone to the Vespa?

No problem with a suitable one Voltage Regulators and an USB port!

We recommend our super compact one Voltage Regulators for all alternators with 12 volts. The controller supplies alternating current and optionally also direct current. Thus, it is not only the perfect and reliable replacement for all conventional voltage regulators, it also enables a modern expansion of the existing on-board network, for example to charge a navigation device or your mobile phone / smartphone.

Mobile phone smartphone charging Vespa

Easy installation of the voltage regulator on your Vespa

The connection to the existing wiring harness is very simple: With complete AC systems, the regulated AC current simply has to be applied to the lines for the electrical consumers. For systems that are operated with AC and DC, a distinction only has to be made between AC and DC and wired accordingly.
Find a few connection examples You here (are deposited under the documents on the right).

USB socket for Vespa scooters

Charge the USB socket to the smartphone mobile phone

Waterproof outdoor USB socket

Super USB power socket with two USB slots for connection to a 12V-24V motorcycle, scooter, scooter, ATV or car battery. Encapsulated waterproof and can therefore also be used in boats or in the camping / outdoor area! Perfect for charging devices such as mobile phones, smartphones, notebooks, iPads, iPhones, iPod touches, Sony, Nokia, HTC, Samsung, GPS, MP3 players, PDAs, etc. on board any vehicle with a 12-24 volt electrical system.

Easily integrated into the 12V system, there are two USB slots on the front.
With a single assignment, a socket has 5V / 2.1A.
If both slots are occupied, 5V / 1.0A are available at each output.

Blue LED lighting: The slots are also permanently switched on by blue background lighting (LED) easily recognizable in the dark.

Technical data:

  • Output voltage: 5V DC +/- 5%
  • Input voltage: 12V-24V DC +/- 4V
  • Maximum output current: 2.1A DC
  • Mounting hole diameter: 29mm
  • Installation depth (overall length): about 60mm
  • Cable length approx 145cm
  • Width clamp: 39mm
  • IP65 protected (completely dustproof + protected against water jets)
  • Incl. Fuse holder with blade fuse
  • Including handlebar bracket for handlebars up to 7/8 "(22,2mm), rubber protection cap.

Easy construction

The connection is made to the ignition lock-switched positive cable of the wiring harness (red cable to live cable when ignition is on, black cable to earth / frame).

Tour tips

Here you can find out how to best stow your luggage with a high-quality bag on the Vespa (Transport luggage on Vespa) and how you can safely extend the range with a compact reserve canister: Reserve canister for the Vespa glove compartment

/0 Comments/by
12V USB socket waterproof

USB socket waterproof and illuminated

USB socket 12V 2x USB, blue illuminated

 

12V USB socket waterproof

 

In addition to the USB double socket From bgm PRO we now have this cool blue illuminated and of course waterproof USB socket on offer:

USB double socket, waterproof -UNIVERSAL-

This great USB socket with two USB slots for connection to a 12V or 24V motorcycle, scooter, scooter, ATV or car battery.

Waterproof encapsulated and can therefore also be used in boats or in camping / outdoor areas! Perfect for charging devices such as mobile phones, smartphones, notebooks, iPads, iPhones, iPod touches, Sony, Nokia, HTC, Samsung, GPS, MP3 players, PDAs, etc. on board any vehicle with a 12-24 volt electrical system.

The socket can, for example, be built into the glove compartment or helmet compartment - or freely mounted on the handlebars.

There are two USB slots on the front. With a single assignment, a socket has 5V / 2.1A. If both slots are occupied, 5V / 1.0A are available at each output.

Illuminated in blue

The slots are easily recognizable even in the dark thanks to a permanently switched blue background lighting (LED).

Technical data:

  • Output voltage: 5V DC +/- 5%
  • Input voltage: 12V-24V DC +/- 4V
  • Maximum output current: 2.1A DC
  • Mounting hole diameter: 29mm
  • Installation depth (overall length): about 60mm
  • Cable length approx 145cm
  • Width clamp: 39mm
  • IP65 protected (completely dustproof + protected against water jets)
  • Incl. Fuse holder with blade fuse

Including handlebar bracket for handlebars up to 7/8 "(22,2mm), rubber protection cap.

Easy construction

The connection is made to the ignition lock-switched positive cable of the wiring harness (red cable to live cable when ignition is on, black cable to earth / frame).

usb sockets scooter

Here it goes to the USB sockets

/0 Comments/by
USB socket 12V, waterproof double socket 12V DC

USB socket 12V waterproof

Our waterproof bgm PRO USB socket is the best seller!

USB hub double socket, waterproof - BGM Pro- input voltage = 12V DC, output voltage = 5V DC / 3.1A - 1x 2,1 A USB - fast charging socket + 1x 1,0A USB fast charging socket - for level installation and handlebars 7 / 8? And 1?

USB socket 12V, double socket, waterproof

USB hub waterproof 12V BGM6800

USB double socket, waterproof - BGM Pro- input voltage = 12V DC, output voltage = 5V DC / 3.1A - 1x 2,1 A USB - fast charging socket + 1x 1,0A USB fast charging socket - for level installation and handlebar 7/8 ″ And 1 ″

Perfect for charging devices such as mobile phones, smartphones, notebooks, iPads, iPhones, iPod touches, Sony, Nokia, HTC, Samsung, GPS, MP3 players, PDAs etc. on board any vehicle with a 12 volt battery. Easily integrated into the 12V system, there are two USB slots with 1x 5V / 2.1A (fast charging socket) and 1x 5V / 1.0A on the front.

Technical data:

  • Output voltage: 5V DC +/- 5%
  • Input voltage: 12V DC
  • Maximum output current: 3.1A DC
  • Mounting hole diameter: 37mm
  • Installation depth (overall length): about 40mm
  • Cable length approx 170cm
  • IP66 protected (completely dustproof + protected against powerful water jets)

usb-double-socket-waterproof-12V-BGM6800

Delivery:

  • Incl. Handlebar bracket for handlebars with 7/8 "(22,2mm) to 1" (25,4mm),
  • Rubber cap and
  • Installation instructions (English).

usb-socket-waterproof-12V-

Easy connection:

Anyone can do that: The connection is either directly to the battery (red cable to battery +, black to ground / frame) or with an ignition switch (red cable to live cable when ignition is on, black cable to ground / frame). Note for Apple devices: All Apple devices must use the USB socket with 1.0A to use the fast charging mode (the only exception is the iPad, please connect this to the 2.1A). usb-2x-socket-waterproof-12V-BGM68003 Buy a USB socket 12V here

/ Comment/by

New voltage regulator Vespa & Lambretta / universal

Voltage regulator BGM PRO 12V AC / DCl

Compact voltage regulator for actually all electronic ignitions, perfect for Vespa and Lambretta.

AC and DC for Vespa and Lambretta

The powerful controller supplies alternating current and optionally also direct current without current fluctuations!

This makes it the perfect replacement for all Ducati 3-pin and 5-pin controllers as well as for the Vespa and Variotronic controller.
It costs only half of the original 5-pin voltage regulator.

ORDER HERE

Vespa sapping regulator in the video

Voltage regulator - BGM6690 4-pin BGM PRO 12V AC / DC- Vespa Lambretta

Compact voltage regulator for all alternators with 12 volts. The controller supplies alternating current and optionally also direct current. Thus it is not only the perfect and reliable replacement for all conventional voltage regulators, it also enables a modern expansion of the existing on-board network.

AC - AC alternating current: Input and output for the unregulated alternating current of the ignition base plate and the regulated current for the wiring harness.

  • SENSE: The AC input and output must be bridged. The output voltage is compared with a reference via the sense line (bridge). This means that the voltage remains constant even when the load fluctuates.
  • DC direct current: output with direct current for charging the battery. With a correspondingly powerful ignition system, consumers can also be connected directly. For example: Satnav systems, water pumps, tachometers, speedometers and all kinds of other toys.
  • Earth: Earth connection to the frame, can easily be taken over from the old controller. Otherwise, connect output earth to the frame and, ideally, to the housing of the controller.
BGM6690BGM6690
BGM6690 (1)BGM6690 (1)
BGM6690 (2)BGM6690 (2)
BGM6690 (3)BGM6690 (3)
BGM6690 (4)BGM6690 (4)

The connection to the existing wiring harness is very easy. With complete AC systems, the regulated AC current simply has to be applied to the lines for the electrical consumers. For systems that are operated with AC and DC, a distinction only has to be made between AC and DC and wired accordingly.
A few connection examples are provided under the documents on the right.
For questions about the product: lambretta@scooter-center.com.

Also available for vehicles with 6 volt on-board voltage!

 

/0 Comments/by