Posts

Vespa PK S with edge protection on the leg shield frame

Edge protection Vespa PK, PK-S, PK-S Lusso, ETS

,

We have it: Edge protection for Vespa PK, PK-S, PK-S Lusso, PK ETS

The Vespa PK S models and their big sister, the Vespa PK ETS, have now achieved cult status among Vespa Smallframe Models. These scooter models have become sought-after vehicles.

From Piaggio, the list of original spare parts still available for the first models of the PK series is getting shorter and shorter.
In addition to the peculiarities such as

  • Tacho,
  • Tank and the
  • Handlebar cover,

sure is that Edge protection for the leg shield one of the heavily sought-after spare parts. With the PK S, this edge protection is a design that you want not shares with her later successors, that makes this part even rarer!

IMG_5230IMG_5230
IMG_5229IMG_5229
IMG_5227IMG_5227
IMG_52310IMG_52310
IMG_5226IMG_5226
IMG_5228IMG_5228
IMG_5225IMG_5225

 

The rare spare part was not available for a long time

Now, after almost a year and the testing of many samples, we can again offer the edge protection of the PKS / ETS models in a very good quality and fit.
The available colors are: silver (like the original) and new: also in black.

The Vespa PKS is independent when it comes to assembling the edge protection, because the edge protection is riveted to a step rail end piece.
We can offer the required end pieces of the step rails in different sets.
The following variants are available:

  • Edge protection silver, without material for fastening 3332778
  • Edge protection black, without material for fastening 3332779
  • Silver edge protection, including tread strips and rivets 3332778KTS1
  • Black edge protection, including tread strips and rivets 3332779KTB1
  • Silver edge protection, including step rails, step rail end pieces and rivets 3332778KTS2
  • Edge protection black, including step rails, step rail end pieces and rivets 3332779KTB2

 

kantenschutz_sc_vespa_pk_s_pk_s_lusso_pk_ss_pk_ets_kunststoff_3332779kantenschutz_sc_vespa_pk_s_pk_s_lusso_pk_ss_pk_ets_kunststoff_3332779
edge protection_sc_vespa_pk_s_pk_s_lusso_pk_ss_pk_ets_kunststoff_3332779_1_edge protection_sc_vespa_pk_s_pk_s_lusso_pk_ss_pk_ets_kunststoff_3332779_1_
edge protection_sc_vespa_pk_s_pk_s_lusso_pk_ss_pk_ets_kunststoff_3332779_2_edge protection_sc_vespa_pk_s_pk_s_lusso_pk_ss_pk_ets_kunststoff_3332779_2_
edge protection_sc_vespa_pk_s_pk_s_lusso_pk_ss_pk_ets_kunststoff_3332779_3_edge protection_sc_vespa_pk_s_pk_s_lusso_pk_ss_pk_ets_kunststoff_3332779_3_
edge protection_sc_vespa_pk_s_pk_s_lusso_pk_ss_pk_ets_kunststoff_3332779_4_edge protection_sc_vespa_pk_s_pk_s_lusso_pk_ss_pk_ets_kunststoff_3332779_4_
0606
0404
0303
0202
0101
0505

Easy construction:

You will need a drill / drill press, and one Blind rivet pliers

  1. The heads of the blind rivets of the front, outer step strips must be removed by drilling. As a result, the end pieces reveal the old edge protection. The remains of the blind rivets remain in the old end pieces, so the end pieces, which are usually already damaged, are unfortunately no longer usable.
  2. The new edge protection is coming from above, at the same time on both sides in the bead of the leg shield down.
  3. The two curves above are hooked into the bead.
  4. The new edge protection is hooked into the new tread strip end pieces at the bottom and the tread strip end pieces are fastened with blind rivets.
  5. Finished :-)
/by