New clamping nipples, screw nipples and adjusting screws (clutch cable, brake cable, accelerator cable) for Vespa & Lambretta in a practical set
We have the Clamping nipples and adjusting screws Optimized for Vespa and Lambretta, making it much easier and more reliable to use!
Now new: also available in a cheaper set.
The Adjusting screw and clamping nipple sets belong next to one Selection of replacement trains in every glove compartment. Suitable for many Vespa and Lambretta models, this set is an effective breakdown helper.
Clamp nipple / screw nipple set -BGM PRO- Lambretta LI, LIS, SX, TV (series 2-3), DL, GP
The set for the Lambretta models contains the following items:
- 3 pieces adjusting screw M7x25mm
- 2 pieces “short” clamping nipples Ø10 × 13mm
- 1 piece clamping nipple “long” Ø10 × 16,2mm
- 2 pieces of abutment brake cable rear Ød = 10mm
- 1 piece front brake cable abutment Ød = 8,5mm
- 2 pieces of throttle cable clamp nipple Ø5,5 × 7,5mm
- 2 pieces pear nipple adapter brake-clutch cable Ø8x9mm
- 1 piece Allen key SW3,5
Longer service life of the inner cables
The clamping nipples for the shift cables and the clutch cable are made of brass and equipped with pressure plates.
The brass material used for the clamping nipple has a self-lubricating effect in the receptacles of the circuit and clutch.
Due to the lower friction of the clamping nipples in the mount, the cables are less subjected to bending and the risk of the cable breaking at this point is greatly reduced.
In the clamping nipples are small pressure plates that protect the inner cable from deadly notch effects and thus prevent the individual wires from being severed when the clamping screw is tightened. The inner cable is less deformed and can therefore be loosened more often and retightened without any problems. The best way to do this is to use a cable pliers.
The required Allen key in size 3,5 is included in the set.
Adjusting screws and clamping nipple / screw nipple set -BGM PRO- Vespa Wideframe, Largeframe and Smallframe
The set for the Vespa models contains the following individual parts:
- 3 pieces adjusting screw M5x30mm
- 4 pieces adjusting screw M5x20mm
- 1 pieces adjusting screw M7x25mm
- 5 pieces clamping nipples for gearshift and clutch
- 1 piece clamping nipple for shift cable PK XL2 / Cosa
- 5 pieces of abutment Ød = 6,2mm for shift and brake cables
- 1 piece abutment Ød = 8,2mm for brake cables
- 2 pieces of clamp nipple throttle cable Ø5,5x7mm
- 2 pieces of clamp nipple throttle cable Ø4x9mm
- 2 pieces pear nipple adapter brake-clutch cable Ø8x9mm
- 2 pieces pear nipple adapter brake-clutch cable Ø9x11mm (PK, PKS)
Optimized adjustment screws
The adjusting screws from the BGM set are with tall nuts equipped. With this small change, the adjustment screws can be operated more easily with a normal open-end wrench even in hard-to-reach places! With the Vespa Smallframe Models with two cables means that the lock nut can be reached thanks to the high design clearly improved.
Optimal clamping nipple
For the clamping nipples for the shift cables and the clutch cable, the version with brass pressure plates is used.
The small pressure plates prevent deadly notch effects and thus protect the inner cable from cutting through the individual wires when the clamping screw is tightened. The inner cable is less deformed and can therefore be loosened and released more often easily retightened become. It is best to have one Cable pliers.
The clamping nipple for all Vespa vehicles PK-XL2, HP and Cosa FL with the so-called 1-train circuit is designed somewhat differently than the well-known counterpart for the 2-train circuits.
The differences can be found here in the diameter (Ø7mm), the overall height (12,5mm) and the wrench size (2x SW8). Due to the slightly higher design, this clamping nipple is also ideal for use on the coupling arm.
Pear nipple adapter
The pear nipple adapters are suitable for all BGM and Piaggio inner cables. This system allows the train to move freely in the adapter under loading and unloading.
We also addressed this topic in our train sets.
The pear nipple adapters in the dimension Ø8x9mm are practically suitable for all Vespa scooters EXCEPT the Vespa PK, PK-S and PK-XL.
For all PK generations before the PK-XL2, the stepped pear nipple adapters in the dimension Ø9x11mm are suitable.