25 meter cable cover for Vespa, Lambretta and other scooters, mopeds and mopeds
Cable sleeve: We now offer one for all screwdrivers inexpensive and practical workshop box with 25 meter cable sheaths on. This container is particularly interesting for scooter riders who often screw on several scooters, but can be worthwhile for a restoration.
Our bgm PRO cable sleeves are popular with ambitious screwdrivers, restorers and renowned workshops and are standard!
The same outer covers are now available in a practical box as 25 running meters. These high-quality bgm outer sleeves for Bowden cables have an inside very low-friction PE layer.
Black or gray with 5mm or 6mm thickness
- 6mm (e.g. front brake and clutch)
- 5mm (e.g. shift and throttle cable / choke)
- in black or
- in gray
Practical workshop box
The 25 meter long outer shells are delivered in one practical workshop box. The sleeves are safely stored in the sturdy cardboard box and can be easily removed through the large opening.
Of course, there are also 50 nickel-plated end caps, enough material for 25 trains of variable lengths.
Our recommendations
We recommend: the bgm cables inside and the practical tool for cutting and tensioning Bowden cables
Cable set universal inside -BGM PRO Vespa, Lambretta-
High quality set with inner cables. Ideal repair kit for on the go or as a replacement for the workshop.
The bgm cable set includes:
- 2x Ø = 1,9mm x 2100mm (bulb type nipple, used as a clutch cable / brake cable in front),
- 2x Ø = 1,6mm x 2100mm (nipple Ø = 5,5mm x 7mm, used as a shift cable)
- 1x Ø = 1,2mm x 2500mm (nipple Ø = 5,5mm x 7mm, used as a throttle cable)
- 1x Ø = 1,2mm x 2500mm (nipple Ø = 3,0mm x 3mm, used as a throttle cable)
Adjusting screws and clamping nipple / screw nipple set -BGM PRO- Vespa
A complete revision set for the control cables as well as all classic Vesps, that should not be missing in any glove compartment!
For the first time, we can offer the otherwise very expensive individual parts as a cost-effective complete set. The whole thing in a fantastic quality. Made by a supplier for the Japanese motorcycle industry, the details of the set are impressive.
As in the original, the clamping screws for the shift cables have an internal plate that protects the cable from being crushed or even sheared off.
Also included are the very important end sleeves that are necessary as an abutment for the Bowden cable outer casing of the shift cables in the older models before the PX series.
The savings compared to the individual parts are over 10 euros!
The 27-part. Set includes ... read more & buy
Cable cutter, side cutter, pull cutter -TOPTUL Pro Series-
Shortening a Bowden cable or wire rope, whether braided or made of solid wire, is now no longer a problem. The professional cable shears from Toptul cut every wire cleanly and effortlessly. Hardened cutting edges that enclose the train prevent the train from fraying and ensure a clean cutting edge. The wire is not squeezed between the cutting edges as with a side cutter, but rather… read more
Cable pliers for gear, clutch and brake cables -ICETOOLZ-
These pliers, which one Giant helper when adjusting the Bowden cables on the scooter is part of the Compulsory equipment for every professional workshop, and saves the layman an infinite amount of effort. Every screwdriver knows the problem that for pull-pulling, locking the arm, and holding and fastening the barrel, at least one hand is missing. This gap fills this pair of pliers! It blocks the train so that you can work in peace and quiet. A real… read more
The alternative: cable sets
If you prefer to use perfectly cut sets, we offer you pre-assembled cable sets with inner sleeves:
