Softstop main stand for Vespa
New main stand for Vespa
We have developed a new main stand for Vespa. The bgm PRO Soft Stop Vespa main stand no longer hits the floor pan.
The stand is available in galvanized, chrome-plated or in black for the classic Vespa Smallframe and for Vespa Largeframe models:
- Center stand -BGM PRO Soft Stop System Ø = 20mm- Vespa Smallframe
V50, V90, PV125, ET3 - bgm Pro
Article no.: BGM4961 - Center stand -BGM PRO Soft Stop System- Vespa Largeframe
Sprint150 (VLB1T), Rally180 (VSD1T), Rally200 (VSE1T), GT / GTR125 (VNL2T), TS125 (VNL3T), GL150 (VLA1T), VNB2T to VNB6T, VBB1T to VBB2T, VS160 (VSBT4), GS1 / GS180 ) - bgm Pro
Article no.: BGM4950
Real innovation
It's just a small thing, but ingenious: the bgm PRO main stand with Soft Stop System puts an end to the main stand feet hitting hard on the floor plate. As with the new Vespa PX Lusso models, the stand stop is now positioned on the sturdy mounting plates on the central frame tunnel.
The main stand is ideally stopped here without causing the floor pan to vibrate.
Not only is the noise when it is folded up, the stand with Soft Stop technology is also gentle on the frame. Cracks in the floor pan, caused by the original main stand, are forever history.
Easy to assemble, delivery incl. Retaining plate
The Soft Stop main stand is delivered including stand sheets. These have additional stop plates on which the main stand rests. This avoids direct contact between the stand tube and the frame and also protects the frame (the original Piaggio stand rubs directly on the painted floor panel from the factory!).
Longer screws are required for assembly, these are included in the set. The main stand spring and stand feet can of course continue to be used from the original stand, but they can also be found in the accessories: Stand feet, main stand Vespa
Here you can get your new main standThere is no longer any need to use another stand!
