BGM PRO silicone engine gasket set for Vespa Largeframe 2-channel motors
Silicone engine gasket set for Vespa Largeframe 2-channel motors 1959-1969 from BGM PRO
The BGM PRO silicone engine gasket set is specifically suitable for engines of the so-called LargeframeModels between year of construction 1959-1969.
These Vespa models can be recognized by the detachable engine side hood (with rubber seal) and a carburetor, which sits in a closed box directly on the engine housing (not on the cylinder).
This new seal kit fits the following models:
- Vespa Sprint150 (VLB1T)
- Vespa GT125 (VNL2T)
- Vespa GL150 (VLA1T)
- Vespa Super125 / 150 (VNC1T / VBC1T)
- Vespa VNB
- Wasp VBA
- Vespa VBB
Compared to the later versions with three overcurrent channels in the cylinder / motor housing, these motors have a slightly different hole pattern for the screw connection of the housing halves. The BGM PRO sealing kit is exactly for these old housing shapes produced.
The seal kit also includes specific seals for the float chamber cover, the carburettor originally installed on these models (SI20 / 15, SI20 / 17).
BGM PRO silicone seal kits consist of a 0,5mm thick, high-quality coated sealing paper (like Piaggio “green” original). In addition, the seals, which are always in contact with oil, have an already applied layer of silicone sealant. This ensures an increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil is where it belongs and where it is useful.
100% Made in Italy
The bgm PRO silicone seals are also available for many other models: Silicone seal
