USB socket 12V waterproof
Our waterproof bgm PRO USB socket is the best seller!
USB hub double socket, waterproof - BGM Pro- input voltage = 12V DC, output voltage = 5V DC / 3.1A - 1x 2,1 A USB - fast charging socket + 1x 1,0A USB fast charging socket - for level installation and handlebars 7 / 8? And 1?
USB socket 12V, double socket, waterproof
Perfect for charging devices such as mobile phones, smartphones, notebooks, iPads, iPhones, iPod touches, Sony, Nokia, HTC, Samsung, GPS, MP3 players, PDAs etc. on board any vehicle with a 12 volt battery. Easily integrated into the 12V system, there are two USB slots with 1x 5V / 2.1A (fast charging socket) and 1x 5V / 1.0A on the front.
- Output voltage: 5V DC +/- 5%
- Input voltage: 12V DC
- Maximum output current: 3.1A DC
- Mounting hole diameter: 37mm
- Installation depth (overall length): about 40mm
- Cable length approx 170cm
- IP66 protected (completely dustproof + protected against powerful water jets)
- Incl. Handlebar bracket for handlebars with 7/8 "(22,2mm) to 1" (25,4mm),
- Rubber cap and
- Installation instructions (English).
Anyone can do that: The connection is either directly to the battery (red cable to battery +, black to ground / frame) or with an ignition switch (red cable to live cable when ignition is on, black cable to ground / frame). Note for Apple devices: All Apple devices must use the USB socket with 1.0A to use the fast charging mode (the only exception is the iPad, please connect this to the 2.1A). Buy a USB socket 12V here
Leave a commentParticipate in the discussion?
Leave us your comment!