News on Vespa topics

bgm PRO variator for Piaggio Quasar engines, e.g. Vespa GTS

The bgm PRO V2 variator for Vespa GTS in the test

Our bgm PRO Vario for the Vespa GTS models is very popular. In this beautiful video Marc von tests Scooteria the bgm PRO V2 variator on his Vespa GTS.

“A cheap and effective tuning measure for all Vespa Gts 300 drivers. I compare it with the performance of the series variator of the Vespa Gts 300 in the city, on the country road and the motorway. "Marc, Scooteria

Conclusion of the test

  • Sportier: faster and higher in the speed range
  • Much higher speeds
  • Greatly improved acceleration
  • Much more aggressive driving performance
  • Without annoying noises
  • +5 km / h top speed 125 km / h according to GPS with 13 "rims without disc
Buy the bgm PRO Vario-Kit here

 

Video variator test

BGM Pro V2 Sport Variomatic Test Vespa Gts 300

 

BGM2311V2 variator

BGM2311V2 variator

How do I install the bgm PRO variator on a Vespa GTS?

Installation of the bgm PRO V2 variator in the Vespa Gts 300 hpe Supertech. Marc from Scooteria is at Cafe Racer 69 and Micha from the Cafe Racer 69 team explains very sympathetically and in detail in 25 minutes what needs to be considered when installing a Vario.

There are also tips, such as using the bgm Vario on your new GTS to use the old one GTS vario cover can drive, which many find more beautiful.

Buy the bgm PRO Vario-Kit here

Variomatic test

You are not sure yet? In this video Marc tests the variator in detail and shows the effect of the bgm PRO Sportvario in a driving test.

Video installation instructions Varioamtik Vespa GTS bgm PRO

BGM Pro Variomatic Vespa Gts 300 - installation

 

Bollag Motos Vespa Wideframe Tuning

Bollag Motos in Scooter Center Vespa shop

This is Ralph Bollag, a likeable Swiss scooter driver who is very familiar with the very old Vespa models and, above all, he is the founder of Bollag Motos.

BollagMoto's video teaser

With us in Bollag Moto's shop you get a selection of Bollag products for your old Vespa Wideframe / Faro Basso / Lamp bottom models.

 

 

Choose your Vespa model here:

Lessmann brushes Made in Germany

Not all brushes are the same!

You are sure to have a classic steel brush in your tool kit. Such a DIY all-round brush is practical and has many areas of application, but it can be much better with little effort:

I'll show you 4 small ones here Wire brushes from LESSMANN (Made in Germany) for special areas of application that make it easier for you to work on your scooter for repairs and maintenance!

LESSMANN brush logo

 

1. The file cleaning brush

Steel brush for cleaning files.

Steel brush for cleaning files. You don't need to buy a new file right away if it no longer has the expected effect; cleaning the file is often enough!
This special brush from Lessmann is suitable for cleaning the cuts of metal files so that the cutting effect is fully available again.
The file cleaning brush is particularly suitable for removing chips and strongly adhering metals such as: copper, brass, bronze and aluminum.

 

 

2. The rust eraser brush

Rust eraser with steel bristles from the German quality manufacturer Lessmann

High quality rust eraser with steel bristles.
The brush is ideal for a careful repair of your vehicle with original paint on which sheet metal is partially rusted. which should not be ground flat. Keyword: O-paint rescue.
With the rust eraser, oxide particles can be removed effortlessly, even on surfaces that have already been scarred. The bristles on both sides have different thicknesses for precise work. Then the area can be passivated with a suitable agent (e.g. multifilm).

CONCLUSION: Great little tool with a big impact and fun factor

 

3. The steel brush for the rough

Steel brush for removing coarse dirt such as rust.

This quality steel brush is particularly suitable for removing coarse dirt such as rust.
It is not suitable for use on surfaces made of plastic, aluminum, copper, etc.

 

4. The brass brush for cleaning spark plugs

Brass brush for cleaning the ground and center electrodes of spark plugs.

Brass brush for cleaning the ground and center electrodes of spark plugs.
Since brushes made of steel roughen the surface unnecessarily and new dirt adheres even better than before,
A brush made from a softer material than steel should always be used to clean spark plugs.

 

 

LESSMANN quality brushes | Made in Germany

Lessmann brushes

In the Scooter Center you get Lessmann brusheswhich have proven to be particularly suitable and proven in our everyday workshop and repairing / tuning scooters. Such a small brush can be very helpful and really make it easier for you to work cleanly on your scooter / Vespa / Lambretta etc.!

7 On the Road - Vespa bgm Platónika project by Scooter Center

As we would say in Colombia: “I'm in my salsa * " (it means that I am fully in my element).  I received Platónika with 18 km and exactly 15 days later, she had a thousand km more.

Completely excited because spring is already there colors I started to drive. And even put together a Motonostra accessory set for touring:

Windshield

MN2514BB

Foldable rear rack

TW3223B

But with this German weather you never know! And sure enough, a week later it starts snowing ... that shouldn't stop me, so I'll protect myself from the harsh cold and keep going.

Pictures and videos come and go, but I still think I'm missing something. The reason I fell in love with this scene: Indeed, their Vespisti.

No meetings in sight, "then I'll go with my colleagues" I thought, but who could go with me? in the marketing office where i'm sitting i only have the two of them Lambretistas found…

And now ... why not?

 

Did you miss any details of Platónika's story? You can find the full story here.

Platónika project - the complete story - Vespa PX bgm 177 by Scooter Center

 

Vespa Gentleman Giro Markus Mayer with 50cc Vespa and suit

VESPA GENTLEMAN GIRO

Who is behind it?

Markus André Mayer, 44 years old and a passionate Vespa fan from beautiful Allgäu.

Vespa Gentleman Giro Markus Mayer with 50cc Vespa and suit

In 2017 Markus was able to do 3 of his passions (Vespa, charity work and social media) in the Giro Germanica to unite. With the help of Vespa clubs from German-speaking countries, we were able to go on a 42-day donation trip over € 25.000 in donations generated by him for the forest pirate camp of the German Children's Cancer Foundation. Of course it was Scooter Center Part of his Giro Germanica Donation trip and we supported the campaign.

Now Markus has something new to do in which he Scooter Center supported again. It is a matter close to our hearts! This time we are the main sponsor and support and sponsor his new mission extensively.

Here in the Scooter Center Blog we will keep you up to date on this year's mission over the next few months.
We are starting today with the first presentation of the VESPA GENTLEMAN GIRO, look forward to, for example, one soon Interview , and a Making of the engine that we build for Markus.

Vespa Gentleman Giro Markus Mayer

 

WHAT IS THE MISSION?

Markus has decided to dedicate the entire year 2021 full-time collecting donations for children with cancer. He starts with the 3 initiatives to raise donations for 40 cancer organizations in 40 European countries:

  • Big European donation trip
  • 10 relay races in different countries
  • 1 world record poker run (Erläuterungen)

For 2021 he is planning a much larger campaign: within 8 months he would like to unite the entire European Vespa scene through a large donation trip around Europe with several linked measures in order for 40 national cancer foundations and care centers at least € 250.000 to be collected. To carry out this heart project, he will need around 14 months in total. About various large travel projects like his

  • 80 days around the world in 2018,
  • USA crossing 2017,
  • or European tour in 2014,

it has already been possible for him to gain a great deal of experience and, above all, a particularly large number of contacts with scooter riders all over the world.

The contacts to the national clubs throughout Europe make it possible to identify suitable donation targets in advance, such as the League contra Cancro in Portugal and to coordinate the planned measures and events in the respective countries. As part of the trip, Markus is planning 3 Guiness Book World Records and thus also to direct the interest of the public and the media to the facilities, clubs and the fundraising campaign.

WHAT'S THE ROUTE?

Vespa Gentleman Giro Europa route

25.000 km through 40 European countries. The specific route will depend on the 200+ clubs that I would like to meet on the way to collect donations.

Even if it doesn't look like it on this map: of course there is a stop at the Scooter Center planned, we will keep you up to date!

WITH WHICH VEHICLE?

“Eleanore” - the Smallframe Vespa. For the tour he uses a Vespa V50N from 1971. It will be the longest 50cc scooter ride ever!

Markus with Eleonore Vespa V50 N

We are currently taking care of the Vespa engine, be curious to find out more about it here in the blog soon.

CAN YOU HELP?

Yes, of course you can help too, Markus depends on support and is looking forward to donations to the individual organizations, more information and Donation opportunity here. You are also welcome to share this post with friends via Facebook, Whatsapp etc.

I'm so excited I can't wait when the end result is a “small” step away ... a bureaucratic step.

Although I have had a Colombian driver's license for more than 10 years, a theoretical and practical test is required in Germany, so: As soon as the project started, I started learning all 800 questions. After I passed it, I also took the practical test. And the Platónika got its approval from the TüV. Both she and I did an excellent job of the paperwork.

The Platónika have registered to replace their old, rusty PX frame, along with their performance improvements, but the license plate was still missing. And the day before my exam, it looked like this:

So my hope for a ride was gone.

However, Alex and the work team surprised me, they had taken care of the details to pick me up on the day of the exam.

Platónika's construction took almost a year. Every single step has been filmed, the pandemic and so on and so on has prolonged the process, but the long-awaited day has finally come.

6 Ready to roll Vespa bgm Platónika project by Scooter Center

 

But this story doesn't end here. The next will be to get to know the European scene. And I'll try out all the TOP components she got. A wide variety of adventures and tests are filmed and told here.

Let's hope that these strange times of social distancing will come to an end soon, and we can bring back the lost hugs, shared routes and contact with the asphalt, and we can live out that passion again.

See you on the way!

Maryzabel & Platónika

Platonic parts
Platónika - How to build a complete new Vespa

Platónika Vespa bgm project

All the adventures of completely rebuilding a Vespa PX (LML) are here by Maryzabel with everyone Secrets in photos and Videos tells.

Of course, Maryzabel uses the Scooter Center High-bay warehouse with over 40.000 parts and installed everything that Scooter Center especially with its brands bgm & MOTO NOSTRA has to offer. Are you curious about it?

1 The Wishlist - Project PLATÓNIKA Vespa px bgm 177

Here you will find a complete list of all the parts that a platonic love would need, each part individually or as a finished wishlist in the shop, loading in the shop takes a moment longer than usual because there are a lot of parts but patience is worth it.

All Vespa parts from the Platónika project:

Schriftzug Beinschild -VESPA- Vespa - Vespa PX Lusso (ab Bj. 1984), Vespa T5 125cc (ab Bj. 1985)

Badge leg shield -VESPA- Vespa - Vespa PX Lusso (from 1984), Vespa T5 125cc (from 1985)    

Manufacturer: Piaggio
SKU: 1050019
Immediately available, can also be picked up in the shop
€ 5,59 *
Gepäckfachschloss-Set -ZADI- Vespa PX Lusso (ab Bj. 1984), T5 125cc - Chrom - 3 Schliesszylinder (Zündschloss, Gepäckfach, Sitzbank)

Luggage compartment lock set -ZADI- Vespa PX Lusso (from 1984), T5 125cc - chrome - 3 lock cylinders ...    

Manufacturer: Zadi
SKU: 7674025
Immediately available, can also be picked up in the shop
€ 29,99 *
Federplättchen On-Off-Lock Buchse -PIAGGIO- Vespa PX Lusso (1984-), T5 125cc, PK S-XL, Gilera Stalker, Piaggio Storm, Hexagon, NRG, NTT, NRG MC2, NRG MC3, NRG Extreme, TPH, TPH X, TPH XR, Zip (bis Bj. 1999)

Spring plate On-Off-Lock socket -PIAGGIO- Vespa PX Lusso (1984-), T5 125cc, PK S-XL, Gilera ...    

Manufacturer: Piaggio
SKU: 1178559
Immediately available, can also be picked up in the shop
€ 0,69 *
On-Off-Lock Buchse -PIAGGIO- Vespa PX Lusso (1984-), T5 125cc, PK S-XL, Gilera Stalker, Piaggio Storm, Hexagon, NRG, NTT, NRG MC2, NRG MC3, NRG Extreme, TPH, TPH X, TPH XR, Zip (bis Bj. 1999)

On-Off-Lock socket -PIAGGIO- Vespa PX Lusso (1984-), T5 125cc, PK S-XL, Gilera Stalker, Piaggio ...    

Manufacturer: Piaggio
SKU: 4950030
Immediately available, can also be picked up in the shop
€ 5,95 *
Schliessbolzen -PIAGGIO Ø23mm- Vespa PX Lusso (1984-), PK50 XL, PK125 XL, Piaggio NRG, NTT, NRG MC2, NRG MC3, NRG Extreme, Storm, TPH, TPH X, TPH XR, Hexagon 125-150

Lock bolt -PIAGGIO Ø23mm- Vespa PX Lusso (1984-), PK50 XL, PK125 XL, Piaggio NRG, NTT, NRG ...    

Manufacturer: Piaggio
SKU: 1259421
Immediately available, can also be picked up in the shop
€ 7,95 *
Gummi Lenk- Zündschloss -PIAGGIO- Vespa PX Lusso (ab Bj. 1984)

Rubber steering and ignition lock -PIAGGIO- Vespa PX Lusso (from 1984)    

Manufacturer: Piaggio
SKU: 9520082
Immediately available, can also be picked up in the shop
€ 3,39 *
Madenschraube Innensechskant -DIN 915 M5 x 8mm- (verwendet für Zündschloss Piaggio Storm, Hexagon, NRG, NRG MC2, NRG MC3, TPH, TPH X, TPH XR, Zip RST, Zip SP, Vespa PK HP, PK S, PK XL, PX, T5 125ccm)

Allen screw -DIN 915 M5 x 8mm- (used for ignition lock Piaggio Storm, ...    

Manufacturer: Piaggio
SKU: 7674847
Immediately available, can also be picked up in the shop
€ 0,69 *
Kantenschutz -OEM QUALITÄT- Vespa PX (ab Bj. 1984) - Kunststoff - Schwarz

Edge protection -OEM QUALITY- Vespa PX (from 1984) - plastic - black    

Manufacturer: OEM quality
SKU: 4350058
Immediately available, can also be picked up in the shop
€ 17,95 *
Federmutter rund -OEM QUALITÄT- (verwendet für Schmutzlappen Vespa PX)

Spring nut round -OEM QUALITY- (used for Vespa PX dirt rags)    

Manufacturer: OEM quality
SKU: 9901099
Immediately available, can also be picked up in the shop
€ 0,69 *
Stoßstange - Rahmenschutz - Schmutzlappen -PIAGGIO- Vespa PX 2011 (2001-) - schwarz

Bumper - frame protection - mud flaps -PIAGGIO- Vespa PX 2011 (2001-) - black    

Manufacturer: Piaggio
SKU: 15769690090
Immediately available, can also be picked up in the shop
€ 14,90 *
Blechschraube -DIN 7981 4,2x16mm-

Self-tapping screw -DIN 7981 4,2x16mm-

Manufacturer: Piaggio
SKU: 9901092
Immediately available, can also be picked up in the shop
€ 3,96 *
Gepäckfachgummi -VESPA- Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), SS180 (VSC1T) - schwarz

Luggage compartment rubber -VESPA- Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), SS180 (VSC1T) - black    

Manufacturer: SKY
SKU: 7673824
Immediately available, can also be picked up in the shop
€ 7,19 *
Schrauben-Set für Gepäckfach -MAURO PASCOLI, 2x M5 x 25mm- Vespa PX, Rally180, Rally200, TS125, GS160 / GS4 (ab VSB1T0054684), SS180

Screw set for luggage compartment -MAURO PASCOLI, 2x M5 x 25mm- Vespa PX, Rally180, Rally200, TS125, ...    

Manufacturer: Mauro Pascoli
SKU: 7675033
Immediately available, can also be picked up in the shop
€ 11,98 *
Mutter -DIN 934- M5

Nut -DIN 934- M5    

Manufacturer: Normfest
SKU: 9901050
Immediately available, can also be picked up in the shop
€ 8,72 *
Fächerscheibe -DIN 6798- M5

Serrated lock washer -DIN 6798- M5

Manufacturer: Normfest
SKU: 1006967
Immediately available, can also be picked up in the shop
€ 5,50 *
Unterlegscheibe Karosserie -DIN 522- M5

Washer body -DIN 522- M5

Manufacturer: OEM quality
SKU: 7673345
Immediately available, can also be picked up in the shop
€ 3,00 *
Gummipuffer Gepäckfachklappe, Nupsi -PIAGGIO- Vespa PX80, PX125, PX150, PX200, T5 125ccm

Rubber buffer for luggage compartment flap, Nupsi -PIAGGIO- Vespa PX80, PX125, PX150, PX200, T5 125ccm    

Manufacturer: Piaggio
SKU: 7675199
Immediately available, can also be picked up in the shop
€ 9,12 *
Blechmutter -PIAGGIO- Ø=4,0mm - 11x16mm - (verwendet zur Befestigung der Kaskade am Rahmen unten Vespa PK / PX / T5 125ccm)

Sheet metal nut -PIAGGIO- Ø = 4,0mm - 11x16mm - (used to fasten the cascade to the frame below ...    

Manufacturer: Piaggio
SKU: 7675335
Immediately available, can also be picked up in the shop
€ 2,78 *
Blechschraube -DIN 7981 F- 4,2x13mm - (verwendet zur Befestigung der Kaskade am Rahmen unten Vespa PK / PX / T5 125ccm)

Self-tapping screw -DIN 7981 F- 4,2x13mm - (used to attach the cascade to the frame below ...    

Manufacturer: Piaggio
SKU: 7675340
Immediately available, can also be picked up in the shop
€ 2,98 *
Unterlegscheibe -DIN 125- M4

Washer -DIN 125- M4    

Manufacturer: Normfest
SKU: 9901043
Immediately available, can also be picked up in the shop
€ 4,29 *
Kunststoffmutter -PIAGGIO- 3,9mm (verwendet für Befestigung Kaskade Vespa PX (ab Bj. 1984) oben)

Plastic nut -PIAGGIO- 3,9mm (used for fastening the cascade Vespa PX (from 1984) on top)    

Manufacturer: Piaggio
SKU: 4550025
Immediately available, can also be picked up in the shop
€ 4,98 *
Blechschraube -DIN 7981- 3,5x19mm (verwendet zur Befestigung Hupe Vespa PX ab 1984)

Self-tapping screw -DIN 7981- 3,5x19mm (used to attach the horn Vespa PX from 1984)    

Manufacturer: Piaggio
SKU: 5320039
Immediately available, can also be picked up in the shop
€ 0,98 *
Unterlegscheibe Karosserie -DIN 9021- M4 - verzinkt

Washer body -DIN 9021- M4 - galvanized

Manufacturer: OEM quality
SKU: 3331312
Immediately available, can also be picked up in the shop
€ 2,76 *
Schriftzug Kaskade -OEM QUALITÄT- Vespa Piaggio - Vespa PX Lusso (Bj. 1984-1997)

Lettering Kaskade -OEM QUALITY- Vespa Piaggio - Vespa PX Lusso (Bj. 1984-1997)    

Manufacturer: OEM quality
SKU: 7674383
Immediately available, can also be picked up in the shop
€ 3,49 *
Schriftzug Kaskade -PIAGGIO- Piaggio Sechseck - Vespa Cosa, Vespa ET2, ET4, Piaggio Beverly, Hexagon, Liberty, Skipper, SKR, Quartz, X8, X9, Zip, Zip 2

Lettering Kaskade -PIAGGIO- Piaggio hexagon - Vespa Cosa, Vespa ET2, ET4, Piaggio Beverly, ...    

Manufacturer: Piaggio
SKU: 1050078
Immediately available, can also be picked up in the shop
€ 3,99 *
Hauptständer -OEM QUALITÄT- Vespa PX, T5 125cc - Schwarz

Center stand -OEM QUALITY- Vespa PX, T5 125cc - black

Manufacturer: OEM quality
SKU: 4350054
Immediately available, can also be picked up in the shop
€ 23,99 *
Ständerbleche / Haltebleche Hauptständer -OEM QUALITÄT- Vespa PX, T5 125cc

Stand plates / retaining plates main stand -OEM QUALITY- Vespa PX, T5 125cc    

Manufacturer: OEM quality
SKU: 5260004
Immediately available, can also be picked up in the shop
€ 5,59 *
Federblech Hauptständer/Rahmen -PIAGGIO- Vespa PX, T5 125ccm

Spring sheet metal main stand / frame -PIAGGIO- Vespa PX, T5 125ccm    

Manufacturer: Piaggio
SKU: 7673023
Immediately available, can also be picked up in the shop
€ 5,18 *
Ständerfeder -PIAGGIO, Ø=32mm, L=121mm- Vespa PX

Stand spring -PIAGGIO, Ø = 32mm, L = 121mm- Vespa PX    

Manufacturer: Piaggio
SKU: 5260002
Immediately available, can also be picked up in the shop
€ 2,99 *
Ständerfederlasche -PIAGGIO- Vespa PX, T5 125cc, PK S, PK XL, Sprint150 (VLB1T), Rally180 (VSD1T), Rally200 (VSE1T), Super, GT125 (VNL2T), GTR125 (VNL2T), TS125 (VNL3T), GL150 (VLA1T), VNA, VNB, VBA, VBB, GS160 / GS4 (VSB1T), SS180 (

Stand spring bracket -PIAGGIO- Vespa PX, T5 125cc, PK S, PK XL, Sprint150 (VLB1T), Rally180 ...    

Manufacturer: Piaggio
SKU: 9000088
Immediately available, can also be picked up in the shop
€ 1,19 *
Schraube -DIN 933- M6 x 20mm (8.8 Festigkeit)

Screw -DIN 933- M6 x 20mm (8.8 strength)

Manufacturer: Normfest
SKU: 9901066
Immediately available, can also be picked up in the shop
€ 3,60 *
Unterlegscheibe -DIN 125- M6

Washer -DIN 125- M6    

Manufacturer: Normfest
SKU: 9901062
Immediately available, can also be picked up in the shop
€ 6,86 *
Mutter selbstsichernd -DIN 985- M6

Self-locking nut -DIN 985- M6    

Manufacturer: Normfest
SKU: 9901061
Immediately available, can also be picked up in the shop
€ 1,16 *
Seitenhaubenverriegelung -LML- Vespa PX (Modelle mit Innenverschluss), T5 125cc - links

Side panel lock -LML- Vespa PX (models with internal lock), T5 125cc - left

Manufacturer: LML
SKU: 3330777
Immediately available, can also be picked up in the shop
€ 14,99 *
Seitenhaubenverriegelung -LML- Vespa PX (Modelle mit Innenverschluss), T5 125cc - rechts

Side hood lock -LML- Vespa PX (models with internal lock), T5 125cc - right

Manufacturer: LML
SKU: 3330776
Immediately available, can also be picked up in the shop
€ 14,99 *
Blechschraube -DIN 7981 4,8x9,5mm (verwendet für Seitenhaubenverriegelung Vespa PX, T5 125ccm)

Self-tapping screw -DIN 7981 4,8x9,5mm (used for side panel lock Vespa PX, T5 125ccm)

Manufacturer: Normfest
SKU: 7675172
Immediately available, can also be picked up in the shop
€ 1,56 *
Gummi Hebel Seitenhaubeninnenverschluss -PIAGGIO- Vespa PX (ab Bj. 1981), PX Lusso, T5 125cc

Rubber lever for side hood inner lock -PIAGGIO- Vespa PX (from 1981), PX Lusso, T5 125cc    

Manufacturer: Piaggio
SKU: 7178689
Immediately available, can also be picked up in the shop
€ 4,56 *
Buchse Rahmen Seitenhaubenverriegelung oben -PIAGGIO- Vespa PX (Modelle mit Innenverschluss), T5 125cc

Bushing frame, side panel lock, top -PIAGGIO- Vespa PX (models with internal lock), T5 ...

Manufacturer: Piaggio
SKU: 7673626
Immediately available, can also be picked up in the shop
€ 6,40 *
Seitenhaubengummi -BGM ORIGINAL- Vespa PX, Vespa T5 125ccm - Schwarz / links

Side panel rubber -BGM ORIGINAL- Vespa PX, Vespa T5 125ccm - black / left    

Manufacturer: bgm Original
Article number: 7676517L
Immediately available, can also be picked up in the shop
€ 11,95 *
Seitenhaubengummi -BGM ORIGINAL- Vespa PX, Vespa T5 125ccm - Schwarz / rechts

Side panel rubber -BGM ORIGINAL- Vespa PX, Vespa T5 125ccm - black / right

Manufacturer: bgm Original
Article number: 7676517R
Immediately available, can also be picked up in the shop
€ 11,95 *
Niete für Seitenhaubengummi -PIAGGIO- Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), TS

Rivet for side panel rubber -PIAGGIO- Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), TS    

Manufacturer: Piaggio
SKU: 7673657
Immediately available, can also be picked up in the shop
€ 2,60 *
Gummi Seitenhaubenhaken hinten -OEM QUALITÄT- Vespa Largeframe (ab Bj. 1958)

Rubber rear side hood hook -OEM QUALITY- Vespa Largeframe (from year 1958)    

Manufacturer: LML
SKU: 4390004
Immediately available, can also be picked up in the shop
€ 3,50 *
Zugsatz -BGM ORIGINAL, PE Innenhülle- Vespa PX Lusso (1984-) - schwarz

Cable set -BGM ORIGINAL, PE inner sleeve- Vespa PX Lusso (1984-) - black

Manufacturer: bgm Original
Item number: BGM6412N
Immediately available, can also be picked up in the shop
€ 27,91 *
Klemmnippel / Schraubnippel -BGM ORIGINAL- Ø=6.8x8mm- Vespa alle Modelle (verwendet für Kupplungszug / Schaltzug in Schaltraste)

Clamping nipple / screw nipple -BGM ORIGINAL- Ø = 6.8x8mm- Vespa all models (used for ...    

Manufacturer: bgm Original
Item number: BGM6496
Immediately available, can also be picked up in the shop
€ 3,45 *
Gummimanschette Kupplungs-/Vorderradbremszug -PIAGGIO- Vespa 125 VNB3T-6T, Super, GT125 (VNL2T), GTR125 (VNL2T), Vespa 150 VL1T-3T, VB1T, VBA1T, VBB1T-2T, VS1T-5T, GL150 (VLA1T), Sprint150 (VLB1T), GS160 / GS4 (VSB1T), SS180 (VSC1T), Vespa Rally

Rubber sleeve clutch / front brake cable -PIAGGIO- Vespa 125 VNB3T-6T, Super, GT125 (VNL2T), ...    

Manufacturer: Piaggio
SKU: 14156406
Immediately available, can also be picked up in the shop
€ 6,39 *
Chokehebel am Rahmen -PIAGGIO- Vespa PX, T5 125cc, Sprint150 (VLB1T), Rally180 (VSD1T), Rally200 (VSE1T), SS180 (VSC1T), GS160 / GS4 (VSB1T), GT125 (VNL2T), GTR125 (VNL2T), TS125 (VNL3T), Super, GL150 (VLA1T), VNA, VNB, VBA, VBB

Choke lever on frame -PIAGGIO- Vespa PX, T5 125cc, Sprint150 (VLB1T), Rally180 (VSD1T), Rally200 ...

Manufacturer: Piaggio
SKU: 1580938
Immediately available, can also be picked up in the shop
€ 10,31 *
Chokehebelfeder -VESPA- PX, T5 125cc, Sprint150 (VLB1T), Rally180 (VSD1T), Rally200 (VSE1T), SS180 (VSC1T), GS160 / GS4 (VSB1T), GT125 (VNL2T), GTR125 (VNL2T), TS125 (VNL3T), Super, GL150 (VLA1T), VNA, VNB, VBA, VBB

Choke lever spring -VESPA- PX, T5 125cc, Sprint150 (VLB1T), Rally180 (VSD1T), Rally200 (VSE1T), ...    

Manufacturer: Piaggio
SKU: 7674837
Immediately available, can also be picked up in the shop
€ 1,39 *
Chokehebelfedersplint -PIAGGIO- PX, T5 125cc, Sprint150 (VLB1T), Rally180 (VSD1T), Rally200 (VSE1T), SS180 (VSC1T), GS160 / GS4 (VSB1T), GT125 (VNL2T), GTR125 (VNL2T), TS125 (VNL3T), Super, GL150 (VLA1T), VNA, VNB, VBA, VBB

Choke lever spring split pin -PIAGGIO- PX, T5 125cc, Sprint150 (VLB1T), Rally180 (VSD1T), Rally200 ...    

Manufacturer: Piaggio
SKU: 8006804
Immediately available, can also be picked up in the shop
€ 1,95 *
Gummi Rahmen/Benzinschlauch -PIAGGIO- Vespa Largeframe und Wideframe (ab Bj. 1958)

Rubber frame / fuel hose -PIAGGIO- Vespa Largeframe and Wideframe (from year 1958)    

Manufacturer: Piaggio
SKU: 4350082
Immediately available, can also be picked up in the shop
€ 4,59 *
Gummi Rahmen/Gas-Chokezug -PIAGGIO- Vespa Largeframe (ab Bj. 1958)

Rubber frame / gas choke cable -PIAGGIO- Vespa Largeframe (from year 1958)    

Manufacturer: Piaggio
SKU: 4350131
Immediately available, can also be picked up in the shop
€ 2,99 *
Gummi Rahmen/Bremszug, Kupplungszug -PIAGGIO- Vespa PX, T5 125ccm, Rally, Sprint, Sprint Veloce, TS, GT, GTR, GL, Super, SS180, GS160, VNA, VNB, VBA, VBB

Rubber frame / brake cable, clutch cable -PIAGGIO- Vespa PX, T5 125ccm, Rally, Sprint, Sprint Veloce, ...    

Manufacturer: Piaggio
SKU: 1046767
Immediately available, can also be picked up in the shop
€ 6,56 *
Gummi Blinkerkabel/Rahmen vorne -OEM QUALITÄT- Vespa PX80, PX125, PX150, PX200, T5 125cc

Rubber indicator cable / frame front -OEM QUALITY- Vespa PX80, PX125, PX150, PX200, T5 125cc    

Manufacturer: OEM quality
SKU: 7673294
Immediately available, can also be picked up in the shop
€ 2,09 *
Gummi für Kabelbaum Ø=14,5x17x6mm -PIAGGIO- Vespa PX

Rubber for wiring harness Ø = 14,5x17x6mm -PIAGGIO- Vespa PX    

Manufacturer: Piaggio
SKU: 3330516
Immediately available, can also be picked up in the shop
€ 2,39 *
Gummi für Kabelbaum/Rahmen -PIAGGIO- Vespa PK XL, PK XL2, PX

Rubber for wiring harness / frame -PIAGGIO- Vespa PK XL, PK XL2, PX    

Manufacturer: Piaggio
SKU: 7675351
Immediately available, can also be picked up in the shop
€ 3,78 *
Gummi Rücklichtkabel/Rahmen -PIAGGIO- Vespa

Rubber taillight cable / frame -PIAGGIO- Vespa    

Manufacturer: Piaggio
SKU: 7673297
Immediately available, can also be picked up in the shop
€ 4,56 *
Ansaugschlauch -PIAGGIO- Vespa PX (1984-), PX Lusso - auch verwendbar für Sprint150, Rally180, Rally200, GT125 (VNL2T), GTR125 (VNL2T), GL150 (VLA1T), Super, VNA, VNB, VBA, VBB

Intake hose -PIAGGIO- Vespa PX (1984-), PX Lusso - can also be used for Sprint150, Rally180, ...    

Manufacturer: Piaggio
SKU: 9021025
Immediately available, can also be picked up in the shop
€ 21,50 *
Gummiring Benzinhahnhebel -OEM QUALITÄT- Vespa PX Lusso (ab Bj. 1984), T5 125cc - Schwarz

Rubber ring fuel tap lever -OEM QUALITY- Vespa PX Lusso (from 1984), T5 125cc - black    

Manufacturer: OEM quality
SKU: 4350078
Immediately available, can also be picked up in the shop
€ 1,00 *
Tank -PIAGGIO- Vespa PX (ab Bj. 1984) - Version mit Getrenntschmierung

Tank -PIAGGIO- Vespa PX (from 1984) - version with separate lubrication

Manufacturer: Piaggio
SKU: 5250011
Immediately available, can also be picked up in the shop
€ 205,00 *
Benzinschlauch -BGM ORIGINAL- Ø innen = 7mm, Ø aussen = 14mm, l = 750mm

Petrol hose -BGM ORIGINAL- Ø inside = 7mm, Ø outside = 14mm, l = 750mm    

Manufacturer: bgm Original
SKU: 5250017
Immediately available, can also be picked up in the shop
€ 3,28 *

Unit: 0.75 meter (€ 4,37 / 1 meter)

Benzinhahn -OEM QUALITÄT- Vespa PX (ab Bj. 1984), PK XL1

Fuel tap -OEM QUALITY- Vespa PX (from 1984), PK XL1    

Manufacturer: OEM quality
SKU: 2529091
Immediately available, can also be picked up in the shop
€ 9,69 *
Schlauchschelle -MiniFlex- Bandbreite 5mm - Ø=9-16mm

Hose clamp -MiniFlex- bandwidth 5mm - Ø = 9-16mm

Manufacturer: Normfest
SKU: 7675790
Immediately available, can also be picked up in the shop
€ 2,98 *
Tankgeber -PIAGGIO- PX (ab Bj. 1984) - Kunststoffverschluss Ø55mm (50-350 Ohm)

Tank sender -PIAGGIO- PX (from year 1984) - plastic cap Ø55mm (50-350 Ohm)    

Manufacturer: Piaggio
SKU: 5250030
Immediately available, can also be picked up in the shop
€ 101,20 *
Tankdeckel -VESPA- PX (ab Bj. 1984), PK XL

Tank cap -VESPA- PX (from 1984), PK XL    

Manufacturer: Piaggio
SKU: 5250013
Immediately available, can also be picked up in the shop
€ 18,99 *
Schraube -DIN 933- M8 x 25mm (8.8 Festigkeit)

Screw -DIN 933- M8 x 25mm (8.8 strength)    

Manufacturer: Normfest
SKU: 9901121
Immediately available, can also be picked up in the shop
€ 3,00 *
Unterlegscheibe -DIN 125- M8

Washer -DIN 125- M8    

Manufacturer: Normfest
SKU: 9901082
Immediately available, can also be picked up in the shop
€ 2,45 *
Sprengring -DIN 127- M8

Snap ring -DIN 127- M8    

Manufacturer: Normfest
SKU: 9901083
Immediately available, can also be picked up in the shop
€ 5,25 *
Steuersatz - Lenkkopflager -PIAGGIO- Piaggio, Gilera, Vespa - oben + unten komplett Set (9 teilig) - Vespa V50, 50N, PV, ?ET3, ?PK, PX, T5, Cosa, Rally, Sprint, Super, GS160, SS180, GTS, HPE, ET2, ET4, LX/LXV, S50-125, Sprint, Primavera, Runner, SKR,

Headset - steering head bearing -PIAGGIO- Piaggio, Gilera, Vespa - top + bottom complete set (9 ...    

Manufacturer: Piaggio
Item number: 4950053KT
Immediately available, can also be picked up in the shop
€ 51,90 *
Schraube -DIN 933- M6 x 25mm (8.8 Festigkeit)

Screw -DIN 933- M6 x 25mm (8.8 strength)    

Manufacturer: Normfest
SKU: 9901067
Immediately available, can also be picked up in the shop
€ 0,98 *
Schraube -DIN 933- M6 x 30mm (8.8 Festigkeit)

Screw -DIN 933- M6 x 30mm (8.8 strength)

Manufacturer: Normfest
SKU: 9901068
Immediately available, can also be picked up in the shop
€ 0,60 *
Kotflügelschraube seitlich M5 x 12mm -OEM QUALITÄT, Linsenkopf- Vespa Smallframe V50, 50N, PV, ET3, PK S, PK XL, Largeframe VNA, VNB, VBA, VBB, Super, Sprint Veloce, Rally - Modelle ohne Zierleiste

Side fender screw M5 x 12mm -OEM QUALITY, pan head- Vespa Smallframe V50, 50N, PV, ...    

Manufacturer: OEM quality
SKU: 5150032
Immediately available, can also be picked up in the shop
€ 1,89 *
Distanzscheibe Kunststoff Ø=18x6,4x6mm für Kotflügel -OEM QUALITÄT- Vespa V50, V90, PV125, ET3 125

Plastic spacer Ø = 18x6,4x6mm for mudguard -OEM QUALITY- Vespa V50, V90, PV125, ET3 125    

Manufacturer: OEM quality
SKU: 7675136
Immediately available, can also be picked up in the shop
€ 3,75 *
Mutter selbstsichernd -DIN 985- M5 (verwendet für Hebelschraube Vespa PX, T5 125ccm, Rally, Sprint, TS, GT, GTR, SS180, GS160, Super, GL, VNA, VNB, VBA, VBB, V50, V90, SS50, SS90, PV125, ET3)

Self-locking nut -DIN 985- M5 (used for lever screw Vespa PX, T5 125ccm, Rally, ...

Manufacturer: Normfest
SKU: 9901162
Immediately available, can also be picked up in the shop
€ 0,19 *
Kotflügelnippel -OEM QUALITÄT- Vespa PX Lusso (ab Bj. 1984) - Kunststoff - schwarz

Mudguard nipple -OEM QUALITY- Vespa PX Lusso (from 1984) - plastic - black

Manufacturer: OEM quality
SKU: 7676854
Immediately available, can also be picked up in the shop
€ 5,60 *
Bremsleitung -SPIEGLER MODULAR (ohne Fittings)- Vespa, Lambretta - schwarz - 1400mm

Brake line -SPIEGLER MODULAR (without fittings) - Vespa, Lambretta - black - 1400mm

Manufacturer: Spiegler
SKU: 3331250
Immediately available, can also be picked up in the shop
€ 60,95 *
Bremsbanjo -SPIEGLER- Schwarz - 20°

Brake banjo -SPIEGLER- black - 20 °

Manufacturer: Spiegler
SKU: 3331249
Immediately available, can also be picked up in the shop
€ 9,09 *
Bremsbanjo -SPIEGLER- Schwarz - 45°

Brake banjo -SPIEGLER- black - 45 °

Manufacturer: Spiegler
SKU: 3331245
Immediately available, can also be picked up in the shop
€ 9,35 *
Hohlschraube Bremsleitung -M10 x 1,00- Aluminium - Schwarz

Banjo bolt brake line -M10 x 1,00- aluminum - black

Manufacturer: Spiegler
SKU: 3332465
Immediately available, can also be picked up in the shop
€ 9,78 *
Bremsbanjodichtung -DIN 7603- A10 x 16 - Aluminium

Brake banjo seal -DIN 7603- A10 x 16 - aluminum    

Manufacturer: Normfest
SKU: 5900012
Immediately available, can also be picked up in the shop
€ 2,40 *
Gasrohr -LML- Vespa PX Disc (1998-) - l=177mm Ø=24mm

Gas pipe -LML- Vespa PX Disc (1998-) - l = 177mm Ø = 24mm

Manufacturer: LML
SKU: 7676675
Immediately available, can also be picked up in the shop
€ 11,25 *
Distanzscheibe Gasrohr/Schaltrohr 24 x 31x 1mm -PIAGGIO- Vespa PX, T5, PV125, ET3, V50 Special, PK S, PK XL1

Distance washer gas pipe / switch pipe 24 x 31x 1mm -PIAGGIO- Vespa PX, T5, PV125, ET3, V50 Special, ...    

Manufacturer: Piaggio
SKU: 4950032
Immediately available, can also be picked up in the shop
€ 4,35 *
Federscheibe Gasrohr/Schaltrohr 22 x 28x 0,75mm -PIAGGIO- Vespa Cosa, PK XL2, PK HP

Spring washer gas tube / switch tube 22 x 28x 0,75mm -PIAGGIO- Vespa Cosa, PK XL2, PK HP    

Manufacturer: Piaggio
SKU: 7675629
Immediately available, can also be picked up in the shop
€ 1,60 *
Gaszugrolle -OEM QUALITÄT- Vespa PX, T5 125cc, PK S, PK XL

Throttle pulley -OEM QUALITY- Vespa PX, T5 125cc, PK S, PK XL

Manufacturer: OEM quality
SKU: 3331912
Immediately available, can also be picked up in the shop
€ 3,59 *
Schaltzugrolle -VESPA- PX, T5 125cc, PK S, PK XL

Shift pulley -VESPA- PX, T5 125cc, PK S, PK XL    

Manufacturer: Piaggio
SKU: 4950036
Immediately available, can also be picked up in the shop
€ 3,59 *
Splint Gaszug-/Schaltzugrolle -VESPA- PX, T5 125cc, Cosa

Cotter pin throttle / shift cable pulley -VESPA- PX, T5 125cc, Cosa    

Manufacturer: Piaggio
SKU: 4950035
Immediately available, can also be picked up in the shop
€ 1,09 *
Bremspumpe -PIAGGIO Heng Tong- Vespa PX80, PX125, PX150, PX200 (alle ab Bj. 1998), PX Millenium, PX2011 - Ø12mm

Brake pump -PIAGGIO Heng Tong- Vespa PX80, PX125, PX150, PX200 (all from 1998), PX Millenium, ...

Manufacturer: Piaggio
SKU: 7673010
Immediately available, can also be picked up in the shop
€ 78,94 *
Schraube -DIN 912- M8 x 20mm (verwendet für Bremspumpe/Lenker Vespa PX ab Bj. 1998)

Screw -DIN 912- M8 x 20mm (used for brake pump / handlebar Vespa PX from 1998)

Manufacturer: OEM quality
SKU: 9901106
Immediately available, can also be picked up in the shop
€ 1,38 *
Bremshebelschraube - Kupplungshebelschraube (Kreuzschlitz) -OEM QUALITÄT- Vespa PX125, PX150, PX200, T5 125cc, ET3

Brake lever screw - clutch lever screw (cross recess) -OEM QUALITY- Vespa PX125, PX150, ...    

Manufacturer: OEM quality
SKU: 9000109
Immediately available, can also be picked up in the shop
€ 3,20 *
Bremshebel -BGM PRO CNC- Scheibenbremse (Heng Tong)- Vespa PX (Bj. 2004-) - Schwarz matt

Brake lever -BGM PRO CNC- disc brake (Heng Tong) - Vespa PX (2004-) - black matt

Manufacturer: bgm Pro
Item number: BGM4541
Immediately available, can also be picked up in the shop
€ 24,89 *
Kupplungshebel -BGM PRO CNC- Seilzug- Vespa Largeframe 1957-1998 - PX, T5, Sprint, Rally, GT, GTR, TS, VNA, VNB, VBB, VBA, GS, SS180, Smallframe 1963-1989 V50, 50N, V90, PV125, ET3, PK S, PK XL1 - Schwarz matt

Clutch lever -BGM PRO CNC- cable pull- Vespa Largeframe 1957-1998 - PX, T5, Sprint, Rally, GT, ...

Manufacturer: bgm Pro
Item number: BGM4571
The article has been ordered and will be available again shortly
€ 33,90 *
Tacho -PIAGGIO- Vespa Ø=105mm - PX Lusso (ab Bj. 2001) - 120km/h

Speedometer -PIAGGIO- Vespa Ø = 105mm - PX Lusso (from 2001) - 120km / h    

Manufacturer: Piaggio
SKU: 1583074
The article has been ordered and will be available again shortly
€ 238,00 *
Schraube -DIN 7985- M5 x 35mm - verwendet für Lenkkopfabdeckung Vespa PX, PK S, PK XL, Luftfilter SI

Screw -DIN 7985- M5 x 35mm - used for steering head cover Vespa PX, PK S, PK XL, air filter SI    

Manufacturer: Normfest
SKU: 4950041
Immediately available, can also be picked up in the shop
€ 1,96 *
Federscheibe gewellt -DIN 137 Stahl verzinkt- M5

Wavy spring washer -DIN 137 galvanized steel- M5

Manufacturer: Normfest
SKU: 43505
Immediately available, can also be picked up in the shop
€ 1,40 *
Schraube -DIN 933- M4 x 12mm (verwendet zur Befestigung Scheinwerfer Vespa PX)

Screw -DIN 933- M4 x 12mm (used to fix the headlight Vespa PX)

Manufacturer: Normfest
SKU: 9901048
Immediately available, can also be picked up in the shop
€ 0,50 *
Federscheibe gewellt -DIN 137 Edelstahl- 100 Stück - M4

Wavy spring washer -DIN 137 stainless steel- 100 pieces - M4

Manufacturer: MB Developments
Item number: 767CWS04
Immediately available, can also be picked up in the shop
€ 4,90 *

Unit: 100 pieces (€ 0,05 / 1 piece)

Schraube -DIN 7985- M5 x 16mm

Screw -DIN 7985- M5 x 16mm    

Manufacturer: Normfest
SKU: 7674871
Immediately available, can also be picked up in the shop
€ 1,98 *
Griff -PIAGGIO- Vespa PX Lusso (ab Bj. 2011) - schwarz - links

Handle -PIAGGIO- Vespa PX Lusso (from 2011) - black - left    

Manufacturer: Piaggio
SKU: 7673018
Immediately available, can also be picked up in the shop
€ 17,99 *
Griff -PIAGGIO- Vespa PX Lusso (ab Bj. 2011) - schwarz - rechts

Handle -PIAGGIO- Vespa PX Lusso (from 2011) - black - right

Manufacturer: Piaggio
SKU: 7673017
Immediately available, can also be picked up in the shop
€ 19,94 *
Lenkkopfschraube -LML- Vespa PX, PK, Rally, Sprint150, 180 SS, Super, TS125, GT125 (VNL2T), GTR125 (VNL2T), ET3, PV125, V50, V90

Steering head screw -LML- Vespa PX, PK, Rally, Sprint150, 180 SS, Super, TS125, GT125 (VNL2T), ...    

Manufacturer: LML
SKU: 9000076
The article has been ordered and will be available again shortly
€ 3,99 *
Lenkkopfmutter -VESPA- PX, PK, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), 180 SS, Super, TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), ET3, PV125, V50, V90

Steering head nut -VESPA- PX, PK, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), 180 SS, ...    

Manufacturer: Piaggio
SKU: 9000077
Immediately available, can also be picked up in the shop
€ 1,89 *
Kabeldurchgang Lenker -LML- Vespa PX (1998-) (verwendet zur Durchführung von Bremsleitung und Bremslichtschalterkabel in den Lenkerdeckel)

Cable passage for handlebar -LML- Vespa PX (1998-) (used to lead through brake line and ...

Manufacturer: LML
SKU: 7676684
Immediately available, can also be picked up in the shop
€ 5,90 *
Birne -W2,1X9,5d- 12V 3W - Weiss (verwendet als Standlicht Klarglasscheinwerfer Vespa PX (ab Bj. 1998))

Bulb -W2,1X9,5d- 12V 3W - white (used as parking light clear glass headlight Vespa PX (from Bj….    

Manufacturer: Floesser
SKU: 9512026
Immediately available, can also be picked up in the shop
€ 1,69 *
Fassung für Scheinwerferbirne HS1 -PIAGGIO- Vespa Cosa 125 (VNR1T, VNR2T0001001), Vespa Cosa 200 (VSR1T0004755, VSR1T, VSR1T3016725), Vespa GT 250 (ZAPM45102), Vespa GT L 125 (ZAPM31101), Vespa GT L 200 (ZAPM31200), Vespa GTS 125 (ZAPM31300), Vespa G

Socket for headlight bulb HS1 -PIAGGIO- Vespa Cosa 125 (VNR1T, VNR2T0001001), Vespa Cosa 200 ...

Manufacturer: Piaggio
SKU: 1253327
Immediately available, can also be picked up in the shop
€ 10,81 *
Birne -PX43t (HS1)- 12V 35/35W - Weiss

Bulb -PX43t (HS1) - 12V 35 / 35W - white    

Manufacturer: Floesser
SKU: 9512235
Immediately available, can also be picked up in the shop
€ 6,00 *
Rücklicht -MOTO NOSTRA- Vespa PX Lusso (MY, 2001-) - schwarz

Rear light -MOTO NOSTRA- Vespa PX Lusso (MY, 2001-) - black

Manufacturer: Moto Nostra
SKU: 7676774
The article has been ordered and will be available again shortly
€ 29,90 *
Birne -BA15s (Stifte gerade) - 12V 10W - Weiss

Light bulb -BA15s (straight pins) - 12V 10W - white

Manufacturer: OEM quality
SKU: 9512110
Immediately available, can also be picked up in the shop
€ 1,69 *
Birne -BA15s (Stifte gerade) - 12V 5W - Weiss

Light bulb -BA15s (straight pins) - 12V 5W - white    

Manufacturer: bgm Style
SKU: 9512005
Immediately available, can also be picked up in the shop
€ 1,69 *
Blinker -PIAGGIO- Vespa PX80, PX125, PX150, PX200, T5 125cc hinten rechts - Weiss

Indicator -PIAGGIO- Vespa PX80, PX125, PX150, PX200, T5 125cc rear right - white    

Manufacturer: Piaggio
SKU: 1583085
Immediately available, can also be picked up in the shop
€ 27,95 *
Blinker -PIAGGIO- Vespa PX80, PX125, PX150, PX200, T5 125cc hinten links - Weiss

Indicator -PIAGGIO- Vespa PX80, PX125, PX150, PX200, T5 125cc rear left - white

Manufacturer: Piaggio
SKU: 1583084
Immediately available, can also be picked up in the shop
€ 26,95 *
Blinker -PIAGGIO- Vespa PX80, PX125, PX150, PX200, T5 125cc vorne links - Weiss

Indicator -PIAGGIO- Vespa PX80, PX125, PX150, PX200, T5 125cc front left - white    

Manufacturer: Piaggio
SKU: 1583082
The article has been ordered and will be available again shortly
€ 25,95 *
Blinker -PIAGGIO- Vespa PX80, PX125, PX150, PX200, T5 125cc vorne rechts - Weiss

Indicator -PIAGGIO- Vespa PX80, PX125, PX150, PX200, T5 125cc front right - white

Manufacturer: Piaggio
SKU: 1583083
Immediately available, can also be picked up in the shop
€ 22,96 *
Birne -BA15s (Stifte gerade) - 12V 21W - Orange

Light bulb -BA15s (straight pins) - 12V 21W - orange    

Manufacturer: bgm Style
SKU: 3330558
Immediately available, can also be picked up in the shop
€ 9,96 *
Schraube Linsen-Senkkopf -DIN 966- M4 x 25mm - (verwendet für Lichtschalter/Blinkerschalter PX, PK, T5, V50 Spezial, verwendet für Blinker vorne PX, T5)

Countersunk head screw -DIN 966- M4 x 25mm - (used for light switch / indicator switch PX, ...    

Manufacturer: Normfest
SKU: 9901065
Immediately available, can also be picked up in the shop
€ 2,76 *
Mutter selbstsichernd -DIN 985- M4

Self-locking nut -DIN 985- M4

Manufacturer: Normfest
SKU: 9901041
Immediately available, can also be picked up in the shop
€ 3,92 *
Fächerscheibe -DIN 6798- M4

Serrated lock washer -DIN 6798- M4

Manufacturer: OEM quality
SKU: 7675499
Immediately available, can also be picked up in the shop
€ 2,40 *
Kabelbaum -GRABOR- Vespa PX Lusso (Deutsch), 1984-1997, ohne Batterie, mit DC Hupe, Hupengleichrichter, Zündgrundplatte mit 5-Kabel

Wiring harness -GRABOR- Vespa PX Lusso (German), 1984-1997, without battery, with DC horn, ...    

Manufacturer: Grabor
SKU: 7674048
Immediately available, can also be picked up in the shop
€ 54,95 *
Blinkerschalter -OEM QUALITÄT- Vespa PK50 S/XL, PK80, PK125 S, PK125 ETS, PX80, PX125, PX150, PX200 (ab Bj. 1984) - 6 Kabel mit Multistecker

Indicator switch -OEM QUALITY- Vespa PK50 S / XL, PK80, PK125 S, PK125 ETS, PX80, PX125, PX150, ...    

Manufacturer: OEM quality
SKU: 9520024
Immediately available, can also be picked up in the shop
€ 17,99 *
Lichtschalter -BGM PRO- Vespa PK S Lusso, PK XL, Vespa PX (1984-1998) - 9 Kabel (DC, Modelle ohne Batterie, mit Hupengleichrichter, Schliesser)

Light switch -BGM PRO- Vespa PK S Lusso, PK XL, Vespa PX (1984-1998) - 9 cables (DC, models without ...    

Manufacturer: bgm Pro
SKU: 1231852
Immediately available, can also be picked up in the shop
€ 33,90 *
Kabelast, Tachostecker -PIAGGIO- Vespa PX (ab Bj. 1998)

Cable branch, speedometer plug -PIAGGIO- Vespa PX (from 1998)    

Manufacturer: Piaggio
SKU: 1582964
The article has been ordered and will be available again shortly
€ 16,99 *
Hupe -OEM QUALITÄT 12V DC- Vespa PX (ab Bj. 1984)

Horn -OEM QUALITY 12V DC- Vespa PX (from 1984)    

Manufacturer: OEM quality
SKU: 9520009
Immediately available, can also be picked up in the shop
€ 18,50 *
Bremslichtschalter -OEM QUALITÄT- Vespa PX80, PX125, PX150, PX200 (Modelle mit Blinker), PK50 XL, PK125 XL, T5 125cc - Schliesser (Blau/Rot)

Brake light switch -OEM QUALITY- Vespa PX80, PX125, PX150, PX200 (models with indicator), PK50 XL, ...    

Manufacturer: OEM quality
SKU: 9520018
Immediately available, can also be picked up in the shop
€ 5,90 *
Bremslichtschalter vorne -LML- Vespa PX (1998-)

Brake light switch front -LML- Vespa PX (1998-)    

Manufacturer: LML
SKU: 7676683
The article has been ordered and will be available again shortly
€ 5,30 *
Kabelast Nachrüst Bremslichtschalter Lenker -BGM PRO- Vespa (-1997), Lambretta - verwendet mit Bremspumpe

Retrofit wiring harness, brake light switch, handlebar -BGM PRO- Vespa (-1997), Lambretta - used with ...    

Manufacturer: bgm Pro
Item number: SC5025
The article has been ordered and will be available again shortly
€ 9,90 *
Blinkerkabel -PIAGGIO- Vespa PX80, PX125, PX150, PX200, T5 125cc Seitenhauben

Indicator cable -PIAGGIO- Vespa PX80, PX125, PX150, PX200, T5 125cc side panels    

Manufacturer: Piaggio
SKU: 9520076
Immediately available, can also be picked up in the shop
€ 47,80 *
Blinkersteckverbindung - PIAGGIO- Vespa PX80, PX125, PX150, PX200- Seitenhauben mit Innenverschluss - Ø12,8mm, ohne Kabel, Anschlussstecker 4,3mm

Indicator connector - PIAGGIO- Vespa PX80, PX125, PX150, PX200- side panels with ...    

Manufacturer: Piaggio
SKU: 9520077
Immediately available, can also be picked up in the shop
€ 12,98 *
Adapterkabel-Set für Hupengleichrichter -BGM PRO- verwendet für BGM6710

Adapter cable set for horn rectifier -BGM PRO- used for BGM6710

Manufacturer: bgm Pro
Item number: BGM6710W
Immediately available, can also be picked up in the shop
€ 12,90 *
Spannungsregler -4-Pin BGM PRO 12V AC/DC- universal

Voltage regulator -4-pin BGM PRO 12V AC / DC- universal    

Manufacturer: bgm Pro
Item number: BGM6690
Immediately available, can also be picked up in the shop
€ 28,95 *
Stoßdämpfer vorne -BGM PRO SC/F1 SPORT, 240mm- Vespa PX80, PX125, PX150, PX200, T5 125cc - schwarz

Front shock absorber -BGM PRO SC / F1 SPORT, 240mm- Vespa PX80, PX125, PX150, PX200, T5 125cc - black    

Manufacturer: bgm Pro
Item number: BGM7741B
Immediately available, can also be picked up in the shop
€ 219,00 *
Silentblock Stoßdämpfer oben / Rahmen hinten -MADE IN THAILAND, Heavy Duty/verstärkt- Vespa PX, T5 125ccm, Rally, Sprint, TS, GT, GTR, SS180, GS160, Super, GL, VNA, VNB, VBA, VBB, V50, V90, SS50, SS90, PV125, ET3

Silentblock shock absorber top / frame rear -MADE IN THAILAND, Heavy Duty / reinforced- Vespa PX, ...

Manufacturer: Made in Thailand
Item number: 9000056HD
The article has been ordered and will be available again shortly
€ 10,90 *
Distanzstück Stoßdämpfer hinten/Silentblock -VESPA l=52mm- Vespa PX80, PX125, PX150, PX200, T5 125cc

Spacer rear shock absorber / silent block -VESPA l = 52mm- Vespa PX80, PX125, PX150, PX200, T5 125cc    

Manufacturer: RMS
SKU: 7676235
Immediately available, can also be picked up in the shop
€ 3,78 *
Sprengring -DIN 127- M9 (verwendet für Stoßdämpferschraube unten (Motor) und Vergaserbefestigung) Vespa PX80, PX125, PX150, PX200 (-1984), Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125

Snap ring -DIN 127- M9 (used for shock absorber screw below (engine) and carburetor mounting) ...    

Manufacturer: OEM quality
SKU: 9901086
Immediately available, can also be picked up in the shop
€ 1,40 *
Felge -BGM ORIGINAL 2.10-10 Zoll Stahl V2.0 - Vespa (Typ PX) - Vespa Smallframe V50, 50N, Special, PV, ET3, PK50-125 (S/XL/XL2), Largeframe PX, T5, Sprint, Rally, GT/GTR, LML Star, Deluxe - Schwarz

Rim -BGM ORIGINAL 2.10-10 inch steel V2.0 - Vespa (type PX) - Vespa Smallframe V50, 50N, ...    

Manufacturer: bgm Original
SKU: 7675211
Immediately available, can also be picked up in the shop
€ 47,90 *
Schlauch -BGM PRO 10 Zoll- 3.50-10, 90/90-10, 100/80-10, 100/90-10 - Ventilposition Vespa (alle Smallframe, Largeframe

Hose -BGM PRO 10 inch- 3.50-10, 90 / 90-10, 100 / 80-10, 100 / 90-10 - valve position Vespa (all ...    

Manufacturer: bgm Pro
Item number: BGM8700V
Immediately available, can also be picked up in the shop
€ 14,58 *
Reifen -HEIDENAU K80SR- 3.50 - 10 Zoll TT 59M (reinforced)

Tire -HEIDENAU K80SR- 3.50 - 10 inch TT 59M (reinforced)    

Manufacturer: Heidenau
Item number: 3331736TT
Immediately available, can also be picked up in the shop
€ 73,90 *
Mutter -DIN 934- M8 - schwarz verzinkt

Nut -DIN 934- M8 - black galvanized

Manufacturer: Normfest
Article number: 9901080B
Immediately available, can also be picked up in the shop
€ 9,90 *
Sitzbank -BGM PRO SportTouring- Vespa Largeframe Sprint, GT, GTR, Super, TS, GL, VNA, VBA, VNB, VBB, T4, Rally180/200, GS160, SS180 - auch passend auf Vespa PX - ohne Schloss

Seat -BGM PRO SportTouring- Vespa Largeframe Sprint, GT, GTR, Super, TS, GL, VNA, VBA, VNB, ...

Manufacturer: bgm Pro
Item number: BGM2720
Immediately available, can also be picked up in the shop
€ 219,00 *
Scheinwerfer inkl. Umrüstrahmen und Scheinwerferhalterung -MOTO NOSTRA- LED HighPower - Ø=143mm (5 3/4") - 12V DC - mit E9-Kennzeichnung - zur Umrüstung von Vespa PX

Headlights including conversion frame and headlight bracket -MOTO NOSTRA- LED HighPower - Ø = 143mm ...

Manufacturer: Moto Nostra
Item number: MN1101KT
Immediately available, can also be picked up in the shop
€ 209,00 *
Seegerring -BOHRUNG DIN472- Ø=42mm - verwendet für Lager Nebenwelle / Primär PX125, PX200, Cosa125, Cosa200, Rally200

Circlip - BORE DIN472- Ø = 42mm - used for bearing auxiliary shaft / primary PX125, PX200, ...    

Manufacturer: OEM quality
SKU: 4940004
Immediately available, can also be picked up in the shop
€ 1,05 *
Kugellager -6302- (15x42x13mm) - (verwendet für Nebenwelle Vespa PX200, Rally180, Rally200, COSA200, T5 125cc, GS150 / GS3, Hoffmann, T1, T2,T3, GL)

Ball bearing -6302- (15x42x13mm) - (used for auxiliary shaft Vespa PX200, Rally180, Rally200, ...    

Manufacturer: FAG
SKU: 3720007
Immediately available, can also be picked up in the shop
€ 7,95 *
Nebenwellenachse -PIAGGIO- Vespa PX125, PX150, PX200, Cosa, T5 125cc - Lagersitz: Ø=15mm, Buchse: Ø=13mm, Länge: 121mm

Secondary shaft axis -PIAGGIO- Vespa PX125, PX150, PX200, Cosa, T5 125cc - bearing seat: Ø = 15mm, bush: ...

Manufacturer: Piaggio
Item number: 1B015233
Immediately available, can also be picked up in the shop
€ 72,95 *
Montagerahmen-Set für Scheinwerfer -MOTO NOSTRA- LED HighPower - Ø=143mm (5 3/4")- zur Montage in Lenkkopf Vespa PX, LML Star, Stella

Mounting frame set for headlights -MOTO NOSTRA- LED HighPower - Ø = 143mm (5 3/4 ″) - for mounting in ...

Manufacturer: Moto Nostra
Item number: MN1101FR
Immediately available, can also be picked up in the shop
€ 38,90 *
Kabelast -BGM ORIGINAL- Tankgeberkabel Vespa PX (1984-) - für Tankgeber mit Kunststoffverschluss

Cable branch -BGM ORIGINAL- tank sender cable Vespa PX (1984-) - for tank sender with plastic lock

Manufacturer: bgm Original
Item number: SC5008
Immediately available, can also be picked up in the shop
€ 7,90 *
Dichtung Tank/Rahmen -MADE IN THAILAND- Vespa alle Largeframe (ab Bj. 1957) - Viton®

Gasket tank / frame -MADE IN THAILAND- Vespa all Largeframe (from 1957) - Viton®    

Manufacturer: Made in Thailand
Item number: 5250007VT
Immediately available, can also be picked up in the shop
€ 9,90 *
Halteplatte Tankgeberkabel -VESPA- PX (ab Bj. 1984)

Retaining plate for tank sender cable -VESPA- PX (from 1984)    

Manufacturer: Piaggio
SKU: 7671988
Immediately available, can also be picked up in the shop
€ 3,00 *
Dichtsatz Zylinder -BGM PRO 177 / 187 ccm- Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-)

Cylinder gasket set -BGM PRO 177/187 cc- Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, ...

Manufacturer: bgm Pro
Item number: BGM1770G
Immediately available, can also be picked up in the shop
€ 15,39 *
Schraube -DIN 7981- 3,9x16mm (verwendet für Befestigung Kaskade Vespa PX (ab Bj. 1984) oben)

Screw -DIN 7981- 3,9x16mm (used for fastening cascade Vespa PX (from 1984) on top)

Manufacturer: Normfest
SKU: 9901069
Immediately available, can also be picked up in the shop
€ 1,39 *
Anschlaggummi Hauptständer -PIAGGIO- Vespa PX

Rubber stop for main stand -PIAGGIO- Vespa PX    

Manufacturer: Piaggio
SKU: 1174773
Immediately available, can also be picked up in the shop
€ 5,19 *
Mutter -DIN 934- M6

Nut -DIN 934- M6

Manufacturer: Normfest
SKU: 9901060
Immediately available, can also be picked up in the shop
€ 1,17 *
Schraube 2.9 x 9.5mm für Fußmattenbefestigung, Schraube für Kotflügelnippel -PIAGGIO- Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), SS180 (VSC1T), GS160 / GS4 (VSB1T), Super, VNA, VNB,

Screw 2.9 x 9.5mm for fixing the floor mats, screw for fender nipple -PIAGGIO- Vespa PX, ...    

Manufacturer: Piaggio
SKU: 1015727
Immediately available, can also be picked up in the shop
€ 1,38 *
Tankgeber -PIAGGIO- PX (ab Bj. 1984) - Blechverschluss Ø48mm (50-270 Ohm)

Tank sender -PIAGGIO- PX (from year 1984) - sheet metal plug Ø48mm (50-270 Ohm)

Manufacturer: Piaggio
SKU: 5250001
Immediately available, can also be picked up in the shop
€ 119,50 *
Schraube -DIN 7985- M5 x 12mm (verwendet für Zündgrundplatte Vespa PK, PX, Cosa, T5 125ccm)

Screw -DIN 7985- M5 x 12mm (used for ignition base plate Vespa PK, PX, Cosa, T5 125ccm)    

Manufacturer: Normfest
SKU: 5150005
Immediately available, can also be picked up in the shop
€ 1,38 *
Schlüsselanhänger -SCOOTER CENTER All you need- Rot

Keyring -SCOOTER CENTER All you need- Red    

Manufacturer: Scooter Center
Item number: SC7777
Immediately available, can also be picked up in the shop
€ 3,90 *
Arbeitshandschuhe - Mechaniker Handschuhe - Schutzhandschuhe -BGM PRO-tection- Feinstrickhandschuh 100% Nylon mit Polyurethan Beschichtung - Grösse XXL (11)

Work gloves - Mechanic gloves - Protective gloves -BGM PRO-tection- ...    

Manufacturer: bgm Pro
Item number: BGM0400XXL
Immediately available, can also be picked up in the shop
€ 1,99 *
Zylinder -BGM PRO 177 / 187 ccm- Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-), LML Star 125/150, Stella 125/150

Cylinder -BGM PRO 177/187 cc- Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint ...    

Manufacturer: bgm Pro
Item number: BGM1770N
Immediately available, can also be picked up in the shop
€ 299,00 *
Auspuff -BGM PRO BigBox TOURING (BBT)- Vespa PX80, PX125, PX150, Sprint, GT, GTR

Exhaust -BGM PRO BigBox TOURING (BBT) - Vespa PX80, PX125, PX150, Sprint, GT, GTR    

Manufacturer: bgm Pro
Item number: BGM1010TR
The article has been ordered and will be available again shortly
€ 119,00 *
Motorgehäuse -LML Drehschiebereinlass, Elestart, ohne Getrenntschmierung- Vespa PX125, PX150

Motor housing -LML rotary valve inlet, Elestart, without separate lubrication- Vespa PX125, PX150

Manufacturer: LML
SKU: 7675678
Immediately available, can also be picked up in the shop
€ 389,00 *
Zündung -BGM ORIGINAL Grundplatte V2.5 Silikon- Vespa PX (1984-2011) Lusso, '98, MY (auch Elestart Modelle) - 5 Kabel

Ignition -BGM ORIGINAL base plate V2.5 silicone- Vespa PX (1984-2011) Lusso, '98, MY (also ...    

Manufacturer: bgm Original
Item number: BGM8025
Immediately available, can also be picked up in the shop
€ 95,90 *
Gabel mit Scheibenbremse (komplett) -LML Classic Grimeca Style- Vespa PX80, PX125, PX150, PX200 Lusso (ab Bj. 1984)

Fork with disc brake (complete) -LML Classic Grimeca Style- Vespa PX80, PX125, PX150, PX200 ...    

Manufacturer: LML
SKU: 5900028
The article has been ordered and will be available again shortly
€ 389,00 *
Tachowelle -BGM ORIGINAL- Vespa PX Lusso (ab Bj. 1984), PX My, PX Disc, PX 2011, T5ccm, Cosa 125, Cosa 200, PK50 S Lusso, PK80 S Lusso - schwarz

Speedometer cable -BGM ORIGINAL- Vespa PX Lusso (from 1984), PX My, PX Disc, PX 2011, T5ccm, Cosa 125, ...

Manufacturer: bgm Original
Item number: BGM6413SC
Immediately available, can also be picked up in the shop
€ 6,99 *
Montage-Set Lenkerunterteil -OEM QUALITÄT- LML Lenker für Vespa PX - 7 Buchsen (verwendet für Schaltrohr und Gasrohr)

Mounting set handlebar lower part -OEM QUALITY- LML handlebar for Vespa PX - 7 sockets (used for ...

Manufacturer: OEM quality
SKU: 3333483
The article has been ordered and will be available again shortly
€ 4,99 *
Federscheibe gewellt -DIN 137 Stahl verzinkt- M6

Wavy spring washer -DIN 137 galvanized steel- M6    

Manufacturer: Normfest
SKU: 43506
Immediately available, can also be picked up in the shop
€ 0,58 *
Blinkrelais -OEM QUALITÄT 3-PIN 12V 10/21W AC- Vespa PK S, PK XL, PK XL2, PX Lusso (1984-), Cosa, Cosa FL, T5 125cc, APE

Flasher relay -OEM QUALITY 3-PIN 12V 10 / 21W AC- Vespa PK S, PK XL, PK XL2, PX Lusso (1984-), Cosa, ...    

Manufacturer: OEM quality
SKU: 9520004
Immediately available, can also be picked up in the shop
€ 13,95 *
Stoßdämpfer hinten -BGM PRO SC/R1 SPORT, 330mm- Vespa PX80, PX125, PX150, PX200, T5 125cc, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR15 (VNL2T), V50, PV, ET3 - schwarz

Rear shock absorber -BGM PRO SC / R1 SPORT, 330mm- Vespa PX80, PX125, PX150, PX200, T5 125cc, ...

Manufacturer: bgm Pro
Item number: BGM7742B
Immediately available, can also be picked up in the shop
€ 169,00 *
Kupplung -BGM Pro Superstrong 2.0 CR80 Ultralube, Typ Cosa2/FL- für Primärrad 64/65Z - Vespa PX200, Rally200 - 24 Zähne

Clutch -BGM Pro Superstrong 2.0 CR80 Ultralube, type Cosa2 / FL- for primary gear 64 / 65T - Vespa ...

Manufacturer: bgm Pro
Item number: BGM8324
Immediately available, can also be picked up in the shop
€ 289,00 *
Primärrad -BGM PRO- Vespa PX200, Rally200 (schrägverzahnt) - 64 Zähne

Primary gear -BGM PRO- Vespa PX200, Rally200 (helical teeth) - 64 teeth    

Manufacturer: bgm Pro
Item number: BGM6564
Immediately available, can also be picked up in the shop
€ 57,91 *
Hauptwelle -PIAGGIO- Vespa PX (1984-), Cosa (VNR1T, VNR2T, VSR1T), T5

Main shaft -PIAGGIO- Vespa PX (1984-), Cosa (VNR1T, VNR2T, VSR1T), T5    

Manufacturer: Piaggio
SKU: 4940008
Immediately available, can also be picked up in the shop
€ 149,00 *
Vergaser -BGM PRO Faster Flow Dellorto / SPACO SI24/24E- Vespa PX200 (Typ ohne Getrenntschmierung)

Carburetor -BGM PRO Faster Flow Dellorto / SPACO SI24 / 24E- Vespa PX200 (type without separate lubrication)    

Manufacturer: bgm Pro
Item number: BGM8571
The article has been ordered and will be available again shortly
€ 139,00 *
Klemmplättchen-Set Bremse hinten -PIAGGIO- Vespa V50, V90, 50N, PV125, ET3, SS50, SS90, PK S, PK XL1, PK XL2, ETS, PX, VNA, VNB, VBA, VBB, Super, GL150, GT125, GTR125, TS125, Sprint150, Vespa Rally180, Vespa Rally200

Clamping plate set, rear brake -PIAGGIO- Vespa V50, V90, 50N, PV125, ET3, SS50, SS90, PK S, PK ...    

Manufacturer: Piaggio
SKU: 1154738
Immediately available, can also be picked up in the shop
€ 13,90 *
Lüfterradabdeckung -OEM QUALITÄT- Vespa PX80, PX125, PX150, PX200 - Modelle mit E-Starter - schwarz

Fan wheel cover -OEM QUALITY- Vespa PX80, PX125, PX150, PX200 - models with electric starter - black    

Manufacturer: OEM quality
SKU: 1050027
Immediately available, can also be picked up in the shop
€ 19,94 *
Nebenwelle -PIAGGIO- Vespa PX125 (VNX1T ab Nr. 146314), PX150 (ab Nr. 264565), PX200, T5 125cc, Cosa, Rally180 (VSD1T), Rally200 (VSE1T) - 12-13-17-21 Zähne

Countershaft -PIAGGIO- Vespa PX125 (VNX1T from No. 146314), PX150 (from No. 264565), PX200, T5 125cc, ...    

Manufacturer: Piaggio
SKU: 9091008
Immediately available, can also be picked up in the shop
€ 181,90 *

Platonika Vespa bgm 177 project

Vespa GTS animation oil level sight glass

New oil pan with sight glass for VESPA GTS

With this practical oil pan, you always have control over the engine oil in your Vespa engine. Already available for the new HPE / models without a connector for the dipstick and soon also for the older HPE models with an dipstick connector on the oil pan.

I think this part is brilliant - I could have come up with the idea, but Peter von Jack fox had the idea first and implemented it perfectly.

Bushing fox oil sight glass Vespa GTS

Instead of measuring the oil level using the dipstick, all you need to do now is look at the sight glass

  • Do I still have enough oil?
  • I risk ggs with the next trip. a major engine failure?
  • With this modified Piaggio oil pan you are on the safe side!

Because through this simple one Tuning trick for Vespa GTS The annoying, time-consuming and imprecise checking of the oil level using the dipstick is no longer necessary. A quick check before the tour is now done by simply looking at the oil sight glass.

Black or silver?

We offer the oil pans in the following colors, always with us: black anodized sight glasses!

How is the oil level read?

The dipstick does not fall away, it is still there for you to check the oil level. The middle of the sight glass shows you the maximum oil level. The sight glass also functions as a spirit level. To read it, it is best to place your GTS on the stand, make sure it is on a flat surface. According to Peter, whether the engine is warm or cold is irrelevant, it doesn't matter much when it comes to the Vespa oil level!

TIPP: Compare the oil level with the oil dipstick the first 2-3 times, this will give you a better feeling for the oil level in the sight glass! With you it could then for example look like this:

Vespa GTS animation oil level sight glass

NOTE:  The oil lamp on the Vespa is an oil pressure control. In practice this means: when the lamp comes on, the engine is usually already down. (If the oil pressure loss is due to insufficient oil quantity)

 

New original Piaggio oil pan

Only NEW ORIGINAL PIAGGIO oil pans are used for the production, which are laboriously reworked on the CNC milling machine for the installation of the oil sight glass.

What's in the box

  • New, original Piaggio oil pan - CNC milled and provided with a sight glass

We also recommend the oil and the oil filter to change, that's what we have to do practical inspection kits.

Installation instructions

The installation of an oil pan is easy, but you should work cleanly. Here we have information about Vespa GTS oil pan and assembly

 

CONCLUSION: Oil level check for Vespa GTS hpe made easy!

 

bgm PRO Vespa pole wheel

Vespa pole wheel bgm PRO electronics

We have developed new fan wheels. With the bgm PRO pole wheel, a very high quality reproduction of the (no longer available) original Piaggio Vespa PK fan wheel is now available.
During the development of this new pole wheel, the tried and tested and the optics have been retained, while performance and quality have been optimized. For this we have invested in, for example, brand new molds and can now offer you the pole wheels that are in demand

  • optimized and in
  • super nice finish
  • fantastic quality too
  • offer a very fair price
  • = ideal for converting to fully electronic ignition of your Vespa

bgm PRO Vespa pole wheel

FEATURES

  • Weight Smallframe: 1.600 grams (for comparison: V50, PV, ET3, PK - orig. Up to 2.800 grams)
  • Weight Largeframe: 2.300 grams (for comparison: Sprint, PX, LML, Cosa - orig. Up to 3.200 grams)
  • High accuracy of the ignition timing
  • Very good concentricity
  • Balanced at the factory
  • Good magnetization
  • Higher performance through optimized wing area

OPTIMAL WEIGHT

The weight of the bgm PRO Vespa pole wheels is tailored to the respective purpose:

  1. The fan wheels for the Vespa Smallframe-Models are with 1600 grams perfect for the lively characteristics of the small engines.
  2. The fan wheels for the Vespa Largeframe-Motors offer with 2300 grams a wonderful mixture of a lot of smoothness and very good acceleration.

Basically, the pole wheels always require a 12V ignition base plate / alternator. This means that every previously contact-controlled motor can be converted to a fully electronic CDI ignition including voltage-controlled on-board electronics. We offer to do this complete sets with all parts required for retrofitting (see alternatives / accessories) for the ignitions:

Vespa ignition in a set

VERSIONS

Vespa Largeframe 2300g, large cone, M12 (1978-) - PX, Cosa, LML 125/150 2-stroke
(Article: BGM8025RT)

For retrofitting everyone Largeframe Motors that already have the large cone (rotor thread M12, wrench size 18), but still have a contact-controlled ignition installed (approx. 1978-1981, PX, Sprint Veloce, GTR, Super, TS) Here the pole wheel and a new 12V ignition base plate are required. In later models (e.g. Vespa PX from around 1982, Cosa, LML) with factory-installed electronic ignition, this can continue to be used. If you convert to the BGM pole wheel, you benefit from significantly more lively engine characteristics with noticeably improved acceleration and higher engine power.

 

Vespa Largeframe 2300g, small cone, M11 (1957-1977) - Sprint, GT, GTR, Super, GL, VNA, VBA, VNB, VBB, Motovespa 125/150 S / N / L
(Article: BGM8032RT)

The most classic of all LargeframeEngines. Still has the old type of crankshaft with a thin (pointed) cone which can be recognized from the outside by the pole wheel nut with M11 thread and wrench size 14.
These motors always have contact ignition from the factory.
By converting the pole wheel, ignition and vehicle wiring harness, a modern vehicle electrical system is created that is absolutely maintenance-free and includes a powerful 12V alternator that provides a fantastic bright light. Starting at the first kick included.

 

Vespa Smallframe 1600g, small cone, M10 - V50, 50N, Spezial, SR50, Sprinter, SS50, SS90, V90, 90 Racer, V100, ET3, PV, PK S
(Article: BGM8033RT)

Suitable for everyone SmallframeMotors with a small cone (flywheel nut M10, SW14 or SW16). These motors always have contact ignition ex works (exception ET3 / PK).
By converting the pole wheel, ignition and vehicle wiring harness, a modern vehicle electrical system is created that is absolutely maintenance-free and includes a powerful 12V alternator that provides a fantastic bright light. Starting at the first kick included. PK models that already have a voltage regulator do not need a new wiring harness.

 

 Vespa Smallframe 1600g, large cone, M12 - PK XL / XL2, PK FL2, PK HP, PK125 ETS, Motovespa PK75 XL (96M / 104M), PK75 FL (127M / 128M)
(Article: BGM8034RT)

For Smallframe Motors that already have the large cone (flywheel thread M12, wrench size 18).
Replaces the original (no longer available) pole wheel 1: 1. If you convert to the BGM pole wheel, you benefit from a significantly more lively engine characteristic with noticeably improved acceleration.
It is also very popular on the older engines (with originally a small cone) if they have been converted to the more stable crankshafts of the Vespa PK XL or ETS.

Moto Nostra luggage rack Vespa GTS hpe

MOTO NOSTRA luggage rack Vespa GTS HPE front

This is our new innovative luggage rack for the new GTS models. This MOTO NOSTRA Vespa GTS luggage rack for the front offers you two great advantages:

  1. Assembly without drilling = reversible
  2. 90 ° contact surface = deep luggage & headlights are not covered

 

Moto Nostra luggage rack Vespa GTS hpe

Easy assembly without drilling

The luggage rack is simply hooked onto the leg shield with the two straps on top and fixed to the frame with the special angle plate supplied. In addition, the luggage rack is supported by rubber buffers on the frame and thus offers a very high level of security.

When unfolded, the carrier platform has a pleasantly flat angle. This means that even a larger piece of luggage can be transported without covering the headlight.

We produced the MOTO NOSTRA luggage rack in three versions:

The assembly is quick and easy! Our assembly instructions will help you, they are easy to understand and are included with the product.

You can of course also get the tool from us: TOPTUL tool shop

MOTO NOSTRA is a Scooter Center Brand!

 

Assembly instructions in the video

In this video we introduce you to our MOTO NOSTRA front luggage rack for the Vespa GTS HPE models.

Luggage rack FRONT Vespa GTS hpe MOTO NOSTRA assembly instructions 🔧 ❤

Download the manual

Of course, you can also download them from our shop. Or right now here:

 

Toptul tools for scooter drivers - tools for scooter repairs & workshops

Toptul tool for scooter riders

We got a large delivery, so the popular ones TOPTUL tools are available again.

TOPTUL tools for scooter riders

Scooter Center TOPTUL shop

TOPTUL has been manufacturing high-quality tools for over 20 years and is absolutely unbeatable in terms of price / performance. TOPTUL products have been in daily use at Vespa, Lambretta & Co. for years and are always convincing.

The finely subdivided toothing of the ratchets is just one example. The massive and robust design with 72 teeth achieves a stitching of only 5 degrees (1/72 turn). This means that you can work precisely and without repositioning even in very tight spaces with little travel for the ratchet.

TOPTUL tools of course meet or exceed the current standards such as DIN / ISO / ANSI. The in-house quality control is very strict and is expressed, for example, in the individual measurement protocol enclosed with each torque wrench with regard to the measurement accuracy and the release behavior.

From our own experience, we can recommend TOPTUL products to every “intensive screwdriver” with a clear conscience.

These are the highlights from the video:

  • Socket wrench set (ratchet case) -TOPTUL 1/4 ″ - 4mm-14mm + bits - 49 pieces
    Article no.: GCAI4901

And the sets are nice, like this one:

  • Screwdriver - screwdriver set -TOPTUL Pro Series- 20 pieces
    Article no.: GZC2005
  • Seeger ring pliers set -TOPTUL- 4 pcs
    Article no.: GPAQ0401
  • Allen key set -TOPTUL- 1,5mm, 2mm, 2,5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm - 9 pieces
    Article no.: GAAL0916

TIPP: Then you have everything new, uniform and in an appealing look in one go!

You can find further recommendations for TOPTUL here with us at Scooter Center Blog: https://blog.scooter-center.com/tag/toptul/

All Toptul tools for scooter drivers are available from us at TOPTUL shop

Vespa Wideframe Tuning

bgm SUPERSTRONG Vespa Wideframe GS

The proven bgm SUPERSTRONG clutch is now also available for the Vespa GS150 / GS160 and SS180 models.

bgm SUPERSTRONG clutch Vespa Wideframe

Ready-to-install coupling for your Wideframe Vespa

The bgm PRO coupling is delivered ready for installation. The scope of delivery includes

  1. the assembled coupling,
  2. a new lock washer,
  3. Clutch cover gasket and
  4. Crescent wedge

We also recommend the same Pressure plate and the separating mushroom to replace, available here in a practical set!

The Superstrong GS coupling replaces the serial coupling of the GS / SS models 1: 1 and can usually * be used without further modifications. The clutch is available with 22 teeth (like original) or with 23 teeth (longer stocky). Helical teeth for use with the standard 67-tooth primary gear.

The bgm SUPERSTRONG 2.0 Ultralube coupling combines:

  • extreme durability,
  • absolute reliability and
  • easy operation

It is the foundation of any solid Vespa engine tuning. The CNC-manufactured clutch basket has excellent concentricity and extremely high torsional rigidity. The Vespa clutch thus offers perfect coupling behavior with a clearly defined grinding point and clean separation of the clutch linings.

It is suitable for that Touring riderwho values ​​high quality, as well as ambitious ones Racer, the one extremely resilient and stable coupling .

Vespa Wideframe Tuning

ULTRALUBE

The latest generation of Superstrong clutches now has an innovative new technology: Ultralube.
Ultralube pumps (through precisely defined bores and centrifugal force) transmission oil both into the highly stressed hub profile (between clutch basket and clutch hub) and onto the clutch linings themselves.
This in the Vespa area unique technology makes the legendary Superstrong 2.0 clutch even more stable than it already is. A clutch designed to last.

PERFORMANCE

The ready-to-install clutch is designed for a power range up to approx. 20PS / 22Nm by means of the mounted clutch springs. Reinforced springs (sold separately, bgm PRO XXL Reinforced clutch spring) expand the performance range of the clutch to over 40 hp. It is still easy to operate.

DELIVERY

The scope of delivery includes the complete ready-to-install clutch with bgm PRO Cosa clutch facings and ten BGM PRO XL springs. A new O-ring for the clutch cover and a new crescent wedge are also included.

RECOMMENDATION

We also recommend a low-alloy gear oil of classes API GL3 / GL4 for high-performance engines in order to prevent the clutch from slipping even under extreme loads. This also applies to our bgm Superstrong couplings. The old engine oil specification SAE30 corresponds to today's transmission oil specification SAE 85W / 90. We recommend this as a lubricant bgm PRO Street gear oil (BGM2025, corresponds to specification API GL-3).

* In some cases it may be necessary to rework the clutch cover and arm, see Instructions & Video:

Instructions for installation and adaptation

You can also find the installation instructions here: Instructions

Tool list:

TIPP: Toptul tool

  • Ratchet; SW10
  • Slotted screwdriver sizes 5 to 6
  • Ratchet; SW14
  • Open-end wrench SW19
  • Torque wrench up to 100Nm
  • Clutch holding tool
  • Clutch puller

Item list, alternatives and accessories

Brake anchor plate Little Kong Crazy Monkey Development

CMD Little Kong brake anchor plate Vespa Smallframe

Little Kong is the modern, modular brake anchor plate from Crazy Monkey Development for Vespa Smallframe Engines. This beautiful brake anchor plate is available for the Vespa models Vespa PV / V50 and Vespa PK.

Wolfgang von CMD has with the Little Kong developed an extremely flat brake anchor plate that also fits engines with a clutch cover underneath. Another feature is that by simply exchanging the brake shoe holder, you can easily switch between the PV and PK brake drums. The modular construction of this noble part makes it possible!

  • Material: high-strength aluminum (EN AW-7075), tool steel
  • Scope of delivery: brake anchor plate, brake shoe holder, brake cam holder, circlip

CONCLUSION:

TIP! Professional solution for series and racing engines and a very nice part!

Pay attention: Vespa Smallframe V50, PV, ET3, PK
Material: High-strength aluminum, tool steel

Info

Modular brake anchor plate for Vespa Smallframe-Motor of the type Vespa PV? /? V50 as well as PK. The extremely flat design enables the brake anchor plate to be used without modification on engines with a clutch cover underneath. By exchanging the brake shoe holder, you can easily switch between PV and PK brake drums.

Vespa gearbox for the Wideframe Vespa V30-33, VM, VN, VL, VB1

At first glance, 900 euros seems like a lot of money for a Vespa gearbox. Even at second glance, the amount does not decrease, but the gear parts from our Italian friend Stefano Benelli rightly enjoy an excellent reputation and are worth every penny! They are essential if you want a reliable transmission that has been race tested.

Benelli Vespa tuning

So if you are looking for a high-end tuning transmission with reliable technology for your old Vespa, you will find it here! Hardened to an average of 60 HRC, the Benelli parts offer exactly the perfect balance of sufficient hardness and the necessary elasticity to permanently withstand the enormous loads in a racing engine.

Complete Vespa Wideframe Transmission

Stefano now also offers his experience and his vast specialist knowledge in the form of a complete gearbox for the Wideframe Models. This includes the four gear wheels, the auxiliary shaft, the auxiliary shaft axis and a gearshift cross with gearshift pin bushing.

You can find all the details here next to the product Benelli Wideframe Transmission

Tool bag Moto Nostra oldtimer retro look

MOTO NOSTRA tool bag for e.g. Vespa & Lambretta

We have new ones Tool bags from MOTO NOSTRA on offer - and as usual at these times, there is a product presentation from the home office today!

Tool bag in retro style | Waxed canvas

For example, for classic vehicles and oldtimers that want to be on the move with style when storing tools, we offer this practical tool roll. Of course, they also go great with a modern Vespa GTS or a motorcycle.

Robust tool bag made of waxes canvas, a hard-wearing and water-repellent material. The tool bag has 5 spacious compartments with large sturdy zippers. So the tool stays where you left it. The many compartments create order and offer quick access in an emergency.

When rolled up, the bag can be securely closed with a wide strap and sturdy clip and compressed as easily as possible. The bag has three handles and two eyelets for fastening or hanging. Available in brown and black and soon also pre-packed with model-specific tools.

 

Tip: also order a bag for the lady in the house, because the bags can also be used stylishly as toiletry bags.

Vespa toilet bag

  • Tool roll with zippered compartments and buckle in Brown 
  • Tool roll with zippered compartments and buckle in black

 

FLASHLIGHT

You will find the appropriate emergency lamp here:
Video of the lamp:

Emergency LED flashlight / work light COB LED from MOTO NOSTRA

 

MOTO NOSTRA RETRO BAGS

You will find matching bags from Moto Nostra here

Video MOTO NOSTRA bags:

New bags for scooters 🎥😮 Moto Nostra bags for scooters