Posts

Rear light -MOTO NOSTRA, LED- Vespa GT, GTS, GTV (2014-, Facelift) - Moto Nostra Item no .: MN505EB

Rear light conversion frame: Vespa GTS Facelift - install rear light on old GTS

Vespa GTS taillight conversion frame MOTO NOSTRA

Why a Taillight Conversion Frame?
Do you like the new LED taillights such as the new MOTO NOSTRA LED Vespa rear light also so good?

LED Vespa GTS taillight Rear Lights MN505EB

vespa-gts-ruecklicht_10vespa-gts-ruecklicht_10
vespa-gts-ruecklicht_09vespa-gts-ruecklicht_09
vespa-gts-ruecklicht_08vespa-gts-ruecklicht_08
vespa-gts-ruecklicht_07vespa-gts-ruecklicht_07
vespa-gts-ruecklicht_06vespa-gts-ruecklicht_06
vespa-gts-ruecklicht_05vespa-gts-ruecklicht_05
vespa-gts-ruecklicht_04vespa-gts-ruecklicht_04
vespa-gts-ruecklicht_03vespa-gts-ruecklicht_03
vespa-gts-ruecklicht_02vespa-gts-ruecklicht_02
vespa-gts-ruecklicht_01vespa-gts-ruecklicht_01

At first glance, however, it is impossible to install this beautiful rear light on your scooter because you have a model before the facelift (2014) and the rear light does not fit into the rear light frame?

The solution!

With the Vespa GTS Conversion rear light frame, we have a very simple and beautiful solution for you:

Rear light frame for retrofitting MOTO NOSTRA

For mounting the new rear light type from 2014 onwards on Vespa GT, GTS, GTL up to 2014

available in

  • Carbon
  • chrome
  • black Matt
  • shiny black

Rear light frame conversion Vespa GTS

This rear light frame, for example, looks very noble in a black matt finish, but can of course also be painted according to your wishes.

Buy rear light frame Vespa GTS here

 

/by
https://www.scooter-center.com/de/ruecklicht-moto-nostra-led-vespa-gt-gts-gtv-2014-facelift-mn505eb?number=MN505EB&ftr=MN505EB_1_1_97.46_1_48_48__

Cornice fanale posterior per conversione: fanale GTS restyling sul vecchio modello GTS

Cornice fanale posteriore MOTO NOSTRA by Vespa GTS

Perché una cornice fanale posteriore per conversione?
Beh, magari ti piacerebbe montare il signal to the LED MOTO NOSTRA, ma la tua Vespa è precedent al restyling. Come fare?

 

LED Vespa GTS taillight Rear Lights MN505EB

vespa-gts-ruecklicht_10vespa-gts-ruecklicht_10
vespa-gts-ruecklicht_09vespa-gts-ruecklicht_09
vespa-gts-ruecklicht_08vespa-gts-ruecklicht_08
vespa-gts-ruecklicht_07vespa-gts-ruecklicht_07
vespa-gts-ruecklicht_06vespa-gts-ruecklicht_06
vespa-gts-ruecklicht_05vespa-gts-ruecklicht_05
vespa-gts-ruecklicht_04vespa-gts-ruecklicht_04
vespa-gts-ruecklicht_03vespa-gts-ruecklicht_03
vespa-gts-ruecklicht_02vespa-gts-ruecklicht_02
vespa-gts-ruecklicht_01vespa-gts-ruecklicht_01

Se hai un modello Vespa GTS precedente al facelift (2014) potrebbe sembrarti problematico montare il fanale sull'apposita cornice.

Solution!

With the cornice per conversion Ti offriamo una solution molto semplice e pratica!

Cornice faro posterior per conversione MOTO NOSTRA

Per montare il nuovo tipo di fanale a partire dal 2014 su Vespa GT, GTS, GTL con anno di costruzione fino al 2014

Available in the following versions:

  • carbon fiber
  • chrome
  • matte black
  • glossy black

Rear light frame conversion Vespa GTS

La versione in color nero opaco è ad esempio molto pregiata, ma puoi chiaramente verniciarla a tuo piacimento.

Acquista qui la cornice fanale posterior Vespa GTS

 

/by
https://www.scooter-center.com/de/ruecklicht-moto-nostra-led-vespa-gt-gts-gtv-2014-facelift-mn505eb?number=MN505EB&ftr=MN505EB_1_1_97.46_1_48_48__

Tail light frame for conversion: Vespa GTS Facelift tail light on old GTS model

MOTO NOSTRA tail light frame for conversion, Vespa GTS

Why a tail light frame for conversion?
Well, maybe you want to mount the new one LED tail light by MOTO NOSTRA but your Vespa is a pre-facelift model.

LED Vespa GTS taillight Rear Lights MN505EB

vespa-gts-ruecklicht_10vespa-gts-ruecklicht_10
vespa-gts-ruecklicht_09vespa-gts-ruecklicht_09
vespa-gts-ruecklicht_08vespa-gts-ruecklicht_08
vespa-gts-ruecklicht_07vespa-gts-ruecklicht_07
vespa-gts-ruecklicht_06vespa-gts-ruecklicht_06
vespa-gts-ruecklicht_05vespa-gts-ruecklicht_05
vespa-gts-ruecklicht_04vespa-gts-ruecklicht_04
vespa-gts-ruecklicht_03vespa-gts-ruecklicht_03
vespa-gts-ruecklicht_02vespa-gts-ruecklicht_02
vespa-gts-ruecklicht_01vespa-gts-ruecklicht_01

If you have a pre-facelift model (2014), it may seem impossible, at first sight, to mount this tail light on the tail light frame of your Vespa.

Our solution for you!

With the tail light frame for conversion we have a very practical and easy solution for you.

Tail light frame for conversion by MOTO NOSTRA

To mount new type tail light from 2014 on Vespa GT, GTS, GTL with year of construction until 2014

Available in the following versions:

  • carbon
  • chrome
  • matt black
  • shiny black

Rear light frame conversion Vespa GTS

The tail light frame in the matt black version is very fine and elegant, but of course you can paint it the way you like.

Buy here tail light frame Vespa GTS

 

/by

Vespa handlebar end indicators LED colorless / black / orange with TÜV certification

, , ,

Moto Nostra LED Vespa handleable end indicators in set and with E-mark

Our Moto Nostra Vespa handlebar end LED indicators feature the classic design of the genuine HELLA indicators and the modern LED technology. The indicators have HighPower LED on both sides of a plate and they give off a much brighter light in comparison with the conventional lighting

LED indicators for Vespa are available as single part or in set with the throttle and gear change tube. The indicator lenses are available as replacement and in different colors.

Buy here Vespa handlebar end LED indicators

Vespa LED handlebar end indicators orange yellow original

Vespa LED handlebar end indicators, tinted black Vespa LED handlebar end indicators clear white

 

DIRECT CURRENT / ALTERNATING CURRENT

The indicators fit all 6 or 12 Volt current sources, direct current (DC) or alternating current (AC). They are also provided with an integrated control electronic unit which allows to select both voltage types. Even at low tension (eg at a low rev range) the indicators give off a constant signal.

E-MARK

The lenses are available in different colors and of course display the E-mark, which means that the indicators are homologated for use on public roads and need no further inspection by MOT.

Buy here Vespa handlebar end LED indicators

USE

The indicators fit all the models which are factory equipped with handlebar indicators. for many Vespas scooters with year of construction approximately before 1980 the replacement of indicators is not problematic since we also offer you the suitable conversion kits.

  • TYPE: handlebar end indicators (originally used for V50, 90 Racer, ET3, Sprint, Rally)
  • LIGHTING: LED
  • VOLTAGE: 6V and 12V AC / DC available
  • WATTAGE: 1.5 and 3.6Watt (+ series resistor)
  • HOMOLOGATION: E-mark (E4)
  • AVAILABLE COLORS
    • genuine (orange),
    • smoke (black)
    • colorless

CONCLUSION: HANDLEBAR END LED INDICATOR FOR VESPA

  1. more safety
  2. modern technology
  3. unchanged classic look
  4. more modern looks with smoke or colorless lenses
  5. homologated for use on public roads

Useful upgrade for your vintage Vespa. High-quality LED technology, classic genuine looks and safety for your ride.

12345678910111213141516171819
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Glass Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Glass Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators orange yellow original
Vespa LED handlebar end indicators orange yellow original
Vespa LED handlebar end indicators orange yellow original
Replacement glass Vespa LED handlebar end indicator orange yellow original
Vespa LED handlebar end indicators orange yellow original
Vespa LED handlebar end indicators orange yellow original
Buy here Vespa handlebar end LED indicators

OUR TIP

The indicators are fitted with a series resistor for the correct functioning of the conventional (mechanical) flasher relay and in order to get a regular intermittence. If you have optimized or would like to optimize the electrical system of your Vespa and you use an electronic flasher relay, you can remove the series resistor (this is placed in the supply cable outside the indicator body). The indicator lenses also fit the genuine indicators, but the E-mark is only valid if you use Moto Nostra LED indicators.

/0 Comments/by

Clignotants embout guidon pour Vespa - à LED - with TÜV certificate - incolore / noir / orange

, , ,

Clignotants à LED homologues de Moto Nostra

The clignotants à LED de Moto Nostra for Vespa relient le design classique des clignotants embout guidon de Hella avec la technology LED modern. Ils sont équipés des LED haute performance sur les deux faces d'une plaque et produisent une lumière plus vive et claire que des ampoules traditionalnelles.

Nous vous proposons les clignotants par unité, en jeu et en kit complet avec les tubes de changement de vitesse et d'accélérateur. Bien sûr vous pouvez également acheter uniquement les cabochons des clignotants!

Achetez clignotant embout guide for Vespa

Vespa LED handlebar end indicators orange yellow original

Vespa LED handlebar end indicators, tinted black Vespa LED handlebar end indicators clear white

 

COURANT CONTINUE / COURANT ALTERNATIF

A version of the présents clignotants s'adapte à des modèles avec 6V, l'autre à des modèles avec 12V. Grâce à la technology intelligent, peu imports si votre scooter est alimenté en courant continu (CC) or courant alternatif (CA). Même en cas de faible tension (p.ex. au point mort, c'est-à-dire sans vitesse enclenchée), les clignotants fournissent un signal constant.

AVEC HOMOLOGATION

Les clignotants disposent d'une homologation E sur leurs cabochons, available en plusieurs couleurs, c'est-à-dire qu'ils sont homologues for a circulation routine et qu'il ne faut pas se présenter au contrôle technique au préalable!

Achetez clignotant embout guide for Vespa

COMPATIBLE MODELS

The clignotants sont compatibles avec tous les modèles qui sont équipés de série de clignotants embout guidon. Beaucoup de modèles fabriqués avant 1980 peuvent être modifiés afin que les clignotants de Moto Nostra soient adaptables. À cet effet nous vous offrons un complete kit.

  • TYPE: clignotants embout guidon Hella (originalement montés sur les modèles Vespa V50, 90 Racer, ET3, Sprint, Rally)
  • AMPOULES: LED
  • TENSION: available in 6V and 12V CA / CC
  • WATTS: 1,5 ou 3,6W (+ resistance)
  • HOMOLOGATION: homologation E (E4)
  • COLORIS DISPONIBLES:
    • original (orange),
    • smoke (noir)
    • transparent (incolor)

LETTER

  1. Increased security
  2. Technology modern
  3. Classic look
  4. Look plus modern avec des cabochons noirs or incolores
  5. Homologue pour une circulation routière

Les nouveaux clignotants embout guidon sont une bonne option pour les ancêtres, puisqu'ils combine le look classique avec la technology LED afin de garantir une sécurité accrue.

12345678910111213141516171819
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Glass Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Glass Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators orange yellow original
Vespa LED handlebar end indicators orange yellow original
Vespa LED handlebar end indicators orange yellow original
Replacement glass Vespa LED handlebar end indicator orange yellow original
Vespa LED handlebar end indicators orange yellow original
Vespa LED handlebar end indicators orange yellow original
Achetez clignotant embout guide for Vespa

CONSULTING

The resistance des clignotants à LED est nécessaire pour garantir le bon fonctionnement avec un relais clignotant conventionnel (mécanique). Si vous disposez d'un relais clignotant électronique, vous pouvez enlever la résistance (située dans le tuyau d'alimentation en dehors du boîtier clignotant). The cabochons sont également compatibles avec les clignotants traditionnels, mais il faut savoir que l'homologation E n'est valable que pour les clignotants à LED de Moto Nostra.

 

/0 Comments/by

Frecce LED a estremità manubrio per Vespa, bianco / nero / arancione con certificato TÜV

, , ,

Frecce LED a maximum manufacture Moto Nostra, in set e con omologazione europea

Our Frecce LED a estremità manubrio Moto Nostra presentano il design classico delle frecce Hella e allo stesso tempo la moderna tecnologia LED. Le frecce per Vespa dispongono di LED high power disposti su entrambi i lati della piastrina ed emettono, rispetto all lampadine convenzionali, una luce chiara e luminosa.

Le frecce sono disponibili sia singolamente che in set con il tubo per comando gas e cambio. Naturally, le gemme sono disponibili come ricambi, singolarmente e nei diversi colori.

Acquista qui frecce LED a maximum manufacture per Vespa

Vespa LED handlebar end indicators orange yellow original

Vespa LED handlebar end indicators, tinted black Vespa LED handlebar end indicators clear white

 

CORRENTE CONTINUA / CORRENTE ALTERNATA

Le frecce a estremità manubrio si adattano a tutte le sorgenti elettriche da 6 o 12V, con corrente continua (DC) o alternata (AC) e sono dotate di un sistema elettronico integrato che consente di selezionare entrambi i tipi di tensione. So a bassa tensione (ad esempio con il motore al minimo) le frecce offrono un segnale costante.

CON OMOLOGAZIONE EUROPEA

Le gemme delle frecce sono disponibili in diversi colori e ovviamente anche dotate di omologazione europea E, dunque idonee alla circolazione stradale senza dover effettuare la revisione presso l'UMC.

Acquista qui frecce LED by Vespa

USE

Le frecce sono compatibili con tutti i veicoli che presentano già in dotazione frecce a estremità manubrio. Di solito, per molti model Vespa prima del 1980 il montaggio not è problematico. A tal scopo ti offriamo i relativi set.

  • TIPO: Frecce a estremità manubrio Hella (used on the Vespa V50, 90 Racer, ET3, Sprint, Rally)
  • ILLUMINATION: LED (integrated)
  • TENSIONE: 6V e 12V AC / DC
  • WATT: 1,5 watt or 3,6 watt (+ resistenza)
  • OMOLOGAZIONE: marchio E (E4)
  • AVAILABLE COLOURS:
    • originals (arancione),
    • smoke (nero)
    • transparent (incolore)

IN BREVE: FRECCE LED A ESTREMITÀ MANUBRIO PER VESPA

  1. Greater security
  2. Modern technology
  3. Styles vintage fedele all'originale
  4. Gemme nere or incolori for a style più moderno
  5. Idonee per la circolazione stradale

Le nuove frecce sono un ottimo upgrade per la tua Vespa. Tecnologia LED di qualità e design fedele all'originale garantiscono una maggiore sicurezza.

12345678910111213141516171819
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Glass Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Glass Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators orange yellow original
Vespa LED handlebar end indicators orange yellow original
Vespa LED handlebar end indicators orange yellow original
Replacement glass Vespa LED handlebar end indicator orange yellow original
Vespa LED handlebar end indicators orange yellow original
Vespa LED handlebar end indicators orange yellow original
Acquista qui frecce LED a maximum manufacture per Vespa

SUGGESTION

Le frecce LED utilizzano una resistenza per il corretto funzionamento dei relè convenzionali (meccanici) e per ottenere un'intermittenza regolare. Chi ha ottimizzato o desidera migliorare l'alimentazione e utilizza un relè a intermittenza elettronico può eliminare la resistenza che si trova nel cavo di alimentazione al di fuori del supporto freccia. Le gemme sono compatibili anche con le frecce originali, ma il marchio di omologazione è valido solo se usate con le frecce a LED Moto Nostra.

 

/0 Comments/by

Intermittent LED en los extremos del manillar de la Vespa con certificado TÜV - incoloro / negro / naranja

, , ,

Intermittent LED homologados de Moto Nostra

Our intermittent LED para los extremos del manillar Unen el diseño clásico de los intermitentes de Hella con la tecnología LED. Cuentan con HighPower LEDs instalados en ambos lados de una placa, los cuales proporcionan una luz más clara y brilliant que una bombilla clásica.

Te podemos ofrecer los intermitentes LED por unidad o un kit que incluye los intermitentes y los tubos mando gas y cambio. Los cristales exist in 3 colores diferentes y los puedes comprar también como recambio.

Comprar intermittent LED para los extremos del manillar de la Vespa

Vespa LED handlebar end indicators orange yellow original

Vespa LED handlebar end indicators, tinted black Vespa LED handlebar end indicators clear white

 

CORRIENTE CONTÍNUA / CORRIENTE ALTERNA

Tenemos intermitentes para 6V and para 12V. Gracias a la tecnología inteligente utilizada no importa si tu scooter se alimenta con corriente contínua (CC) o corriente alterna (CA). Incluso en momentos de baja tensión (p.ej. en el punto muerto, en el que no hay ninguna marcha engranada) se transmite una señal del intermitente constante.

WITH HOMOLOGACION

Los intermitentes cuentan with certificado CE, el cual figura en los cristales. Significa que son homologated for circular por carretera, por lo cual los puedes montar directamente sin tener que pasar por la ITV!

Comprar intermittent LED para los extremos del manillar de la Vespa

COMPATIBLE MODELS

Son compatibles with todos los models de Vespa que de casa ya vienen con intermitentes en los extremos del manillar. Muchos de los models fabricados antes de 1980 se pueden modificar fácilmente para poder montar estos intermitentes. Para ello, ofrecemos un Complete kit.

  • TIPO: intermittent Hella en los extremos del manillar (originalmente montado en los modelos Vespa V50, 90 Racer, ET3, Sprint, Rally)
  • BOMBILLAS: LED
  • TENSIÓN: available with 6V and 12V CA / CC
  • DADIES: 1,5 o bien 3,6 vatios (+ resistencia en serie)
  • CERTIFICATE: CE certificate (E4)
  • COLORS AVAILABLE:
    • original (naranya)
    • tintado (negro)
    • transparent (incoloro)

CONCLUSION

  1. greater security
  2. modern technology
  3. classic design
  4. posibilidad de montar cristales negros o incoloros para conseguir un aspecto more modern
  5. Homologation para circular por carretera

Los nuevos intermitentes para los extremos del manillar son una buena opción para cualquier Vespa classic.

12345678910111213141516171819
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Glass Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Glass Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators orange yellow original
Vespa LED handlebar end indicators orange yellow original
Vespa LED handlebar end indicators orange yellow original
Replacement glass Vespa LED handlebar end indicator orange yellow original
Vespa LED handlebar end indicators orange yellow original
Vespa LED handlebar end indicators orange yellow original
Comprar intermittent LED para los extremos del manillar de la Vespa

OUR ADVICE

La resistencia en serie de los intermitentes LED de Moto Nostra es necesaria para el correcto funcionamiento con un relé de intermitencia convencional (mecánico). En caso de haber montado un relé de intermitencia electrónico, it posible eliminar la resistencia en serie (situada en el cable de alimentación fuera de la carcasa del intermitente). Los cristales de Moto Nostra sirven también para los intermitentes comunes, pero el certificado CE es únicamente válido para el conjunto de los intermitentes LED de Moto Nostra.

 

/0 Comments/by

Vespa handlebar end indicator LED white / black / orange with TÜV

, , ,

Moto Nostra LED Vespa handlebar end indicators in a set with E-mark

Our Moto Nostra Vespa handlebar end indicator LED combines the classic design of Hella handlebar end indicators with modern LED technology. The Vespa handlebar indicator has high power LEDs on a circuit board fitted on both sides. Compared to conventional light sources, these emit a clear and brilliant light with almost no switch-on delay.

We offer the Vespa LED indicators individually or as a complete set with gas and switching tube. The glasses are of course available individually as spare parts in all colors!

Buy Vespa handlebar end indicators LED here

Vespa LED handlebar end indicators orange yellow original

Vespa LED handlebar end indicators, tinted black Vespa LED handlebar end indicators clear white

 

DC AC

The handlebar indicators are suitable for all 6 volt or 12 volt power sources, regardless of whether direct current (DC) or alternating current (AC)! Clever integrated control electronics enable the optional operation on both types of voltage. Even at low voltage (e.g. when idling) they offer a constant flashing signal.

WITH E-MARK / TÜV

The indicators naturally have an E-mark / E-mark on the indicator glasses, which are available in different colors. The turn signals are E-marked Can be used immediately in traffic and no longer have to be approved by the TÜV!

Buy Vespa indicator LED with TÜV here

USE

The indicators fit on all vehicles on which handlebar end indicators have already been used at the factory. Many Vespa vehicles built before around 1980 can usually be retrofitted without any problems. We offer corresponding sets for this.

  • TYPE: handlebar end indicator Hella (originally used on Vespa V50, 90 Racer, ET3, Sprint, Rally)
  • LIGHT SOURCE: LED (permanently integrated)
  • VOLTAGE: 6V and 12V AC / DC available
  • WATT: 3,6Watt (+ series resistor)
  • TEST MARK: E-mark (E4)
  • AVAILABLE COLOURS:
    • original (orange),
    • tinted (black)
    • clear (white)

CONCLUSION VESPA HANDLEBAR END INDICATOR LED

  1. higher security
  2. Modern technology
  3. unchanged classic look
  4. optional modern look through black or white glasses
  5. Approval for public road traffic

The new handlebar end indicators are a useful update for every oldie. Robust LED technology, paired with a classic, original look result in a safety plus without this being recognizable from the outside!

12345678910111213141516171819
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Glass Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators clear white
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators, tinted black
Glass Vespa LED handlebar end indicators, tinted black
Vespa LED handlebar end indicators orange yellow original
Vespa LED handlebar end indicators orange yellow original
Vespa LED handlebar end indicators orange yellow original
Replacement glass Vespa LED handlebar end indicator orange yellow original
Vespa LED handlebar end indicators orange yellow original
Vespa LED handlebar end indicators orange yellow original
Buy Vespa handlebar end indicators LED here

OUR TIP

The LED indicators use a series resistor to operate on the existing on-board network / indicator relay. This is necessary in order to adequately address conventional (mechanical) flasher relays and to achieve even timing. If you have optimized your on-board network or still want to, you can remove the series resistor (which is located outside the indicator housing in the supply line) when using an electronic flasher relay. The indicator glasses also fit conventional indicators, but the test mark is only valid when used with the Moto Nostra LED indicator.

 

/3 Comments/by

Modern Vespa styling tips

Vespa S LED rear light whiteWe have a few super hot parts for your Vespa LX, LXV, S, GT, GTL or GTS.

Headlight umbrellas have been one of the long-running hits for Vespa for decades.

The parts not only have a nice retro look, they also increase driving safety. Especially when driving at night, the headlights can dazzle you at the top and cause irritation. The little umbrellas provide a remedy. The emotionally inclined among us like to compare the lampshade with the blink of an eye.

We can offer you the umbrellas in classic chrome or sporty black. Detailed installation instructions for easy assembly are included. The umbrellas fit on the Vespa Gt, GTL, GTS or LX and LXV Vespas.

CLASSIC headlight shield

The first LED taillights in clear glass optics have just arrived for the LX, LXV and S. This makes the rear look much more contemporary. The dimensions are the same as the original. The LED rear light comes with an E-mark and is therefore approved for public road traffic.

The LEDs sit in high-gloss chrome-plated honeycombs, are characterized by their extremely high luminosity and the significantly longer service life compared to normal light bulbs.

Here, too, assembly is child's play and can also be carried out by the inexperienced screwdriver without any problems.

bgm LED taillight for your Vespa LX, LXV and S

 

 

 

 

 

/0 Comments/by